Building Instructions
Filters:
Bag 2 Part 2 from FIRST LEGO League 2019-2020 City Shaper Challenge
These are instructions on how to build the:
- Bridge Ramp
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
- #848
- 21 Aug 2019
Catapult over the brick
Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult.
This robot construction itself was used in the FIRST LEGO League Senior Solutions competition
- #148
- 01 Dec 2015
- 1
Reusable geared attachment 3 from LEGO Education SPIKE Prime, with 3D building instructions
This is the third type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
- #1266
- 22 Mar 2021
Power switch mission model from LEGO Education SPIKE Prime for FLLCasts Off-season Challenge, in 3D building instructions
This is the Prime Power Switch mission as we've designed it for FLLCasts Off-season Challenge. It it a useful mission to accomplish with different attachments and approaches. The mission is to rotate the lever of the mission model.
The LEGO Mindstorms EV3 version of this mission model is available at Power Switch mission model. FLLCasts Off-season Challenge
- #1247
- 23 Feb 2021
FLL 2018: Nightbeast Multi-purpose Attachment. M11, M13
This is the attachment of Team "Nightbeast", with which they do:
M11–Escape Velocity and M13–Observatory
The Observatory result depends on the model. Sometimes the pointer is in the orange area otherwise in the white area.
- #738
- 14 May 2019
Escape Velocity. Mission 11 from FIRST LEGO League 2018 Into Orbit Challenge
Background
Soon after a launch, rocket engines often separate away from spacecraft by design, but that’s long before the spacecraft leaves the pull of gravity. So why doesn’t the spacecraft fall back to earth?
Mission
The robot needs to impact the strike pad hard enough to keep the spacecraft from dropping back down.
Scores
- Get the spacecraft to go so fast and high that it stays up, by pressing/hitting the strike pad: 24
- Possible scores: 0, 24
Scoring Requirements
- The result must be visible at the end of the match.
- Activate the spacecraft by pressing/hitting the strike pad. > Only allowed method. Must be observed by the referee.
(mission descriptions source https://www.first-lego-league.org/)
- #538
- 01 Jan 2016
Ambulance and Truck Robot Attachment
If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.
Built from LEGO Mindstorms EV3 parts.
- #75
- 11 Oct 2015
- 3
Heavy lifting circular attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
An attachment designed for Heavy lifting. It's build with LEGO MINDSTORMS Robot Inventor 51515 and it has a gear wheels mechanism that allows you to increase the torque and lift really heavy things. Build the attachment and check out the tutorial. This will teach you one more principle that you could use for FIRST LEGO League competitions.
- #1502
- 11 Apr 2022
Gazon 2.1, a LEGO Mindstorms Robot Inventor almost box robot with a single sensor
This almost box robot is build from the LEGO Mindstorms Robot Inventor set. The idea behind this robot is to be able to build it from Robot Inventor and to use it during FIRST LEGO League competitions
- #1452
- 04 Apr 2022
Bag 4 - Step Counter - FIRST LEGO League 2020-2021 RePLAY
These are instructions on how to build the:
- Step Counter
You can find more building instructions and tips and tricks about the competition on this page.
- #1085
- 31 Aug 2020
Bag 3 Part 2 from FIRST LEGO League 2019-2020 City Shaper Challenge
These are instructions on how to build the:
- Tree
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
- #850
- 21 Aug 2019
Meteoroid Deflection. Mission 14 from FIRST LEGO League 2018 Into Orbit Challenge
Background
The chance of a “serious” meteoroid hitting earth in our lifetime is extremely low, but it’s not zero, and the devastation could truly wipe us out. How will scientists and engineers keep us safe?
Mission
From west of the free-line, send one or both meteoroids independently to the meteoroid catcher. “Independently”: see also M01, Section “Scoring Requirements”.
Scores
- Meteoroid(s) touch(es) the mat in the centre section of the meteoroid catcher: 12 each
- Meteoroid(s) touch(es) the mat in either side section of the meteoroid catcher: 8 each
- Possible scores: 0, 8, 12, 16, 20, 24
Scoring Requirements
- The result must be visible at the end of the match.
- The meteoroids need to be sent over the free-line to touch the mat in the meteoroid catcher > Only allowed method. Must be observed by the referee.
- The meteoroids must be hit/released while they are clearly and completely west of the free-line. > Only allowed method. Must be observed by the referee.
- While between hit/release and scoring position, the meteoroid must be clearly independent. > Only allowed method. Must be observed by the referee.
- If ever the ring-set meteoroid is off its ring, you may remove the ring from the field by hand. This is a special exception to the rules.
(mission descriptions source https://www.first-lego-league.org/)
- #537
- 01 Jan 2016
Heavy lifting vertical from LEGO MINDSTORMS Robot Inventor, with building instructions
This is a heavy lifting attachment and it can lift mission models vertically. It is build entirely from LEGO MINDSTORMS Robot Inventor 51515 parts. This is one of the more complex and interesting attachments that we demonstrate in the course and it show how a few gear wheels and levers could be used to change the motion from circular to linear. This is powerful concept that could be very valuable during FIRST LEGO League competitions.
- #1505
- 29 Apr 2022
FLL 2019: Attachment To Accomplish The City Shaper Traffic jam (06) Robot Game Mission
This is the attachment to accomplish Fll 2019 M06 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial to do.
- #1184
- 27 Sep 2020
Bag 7 from FIRST LEGO League 2019-2020 City Shaper Challenge
These are instructions on how to build the:
- White Building Units
- Blue Building Units
- Building Upgrades
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
- #857
- 21 Aug 2019
Reusable geared attachment 2 from LEGO Education SPIKE Prime, with 3D building instructions
This is the second type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
- #1263
- 19 Mar 2021
Bag 6 - Weight Machine - FIRST LEGO League 2020-2021 RePLAY
These are instructions on how to build the:
- Weight Machine
You can find more building instructions and tips and tricks about the competition on this page.
- #1127
- 31 Aug 2020
FLL 2018: Nightbeast Multi-purpose Attachment. M05 and M06
This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
- #731
- 16 May 2019
Natures Fury Buildings
Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions.
- #144
- 06 Oct 2015
- 1