Хващач от ЛЕГО Mindstorms версия 2
Това е втора версия на Хващач от ЛЕГО Mindstorms. При него се използват четири зъбни колела, които задвижват лостовете.
- #422
- 01 Apr 2017
Това е втора версия на Хващач от ЛЕГО Mindstorms. При него се използват четири зъбни колела, които задвижват лостовете.
Този модул е предназначен за тактилната игра за памет и се прикрепя за базата на робота. Този модул използва сензор за завъртане на средния мотор, за да засече колко е бил завъртян мотора.
Виждали ли сте динозавър? Истински ли? Ако ли не, сега ще имате възможност да си построите робот динозавър!
An awesome ski-jet robot, steering with a medium motor and powered by a single large motor. It also has a pair of inclined treads, making it especially well-suited for the harsh winter terrain.
*There is a mistake in this robot you will have to find. How would you make it work?
Dwell is a car built with a LEGO MINDSTORMS EV3 set. It uses the medium motor for powering the back wheel and one more medium motor for rotating the front wheels and thus turning. Of course, there is a differential at the back.
Winter might be far away or it might just be coming - depending of course on where you are in the world. But you can always spend a few hours having fun with a LEGO Mindstorms Snowmobile. A really challenging construction that requires good preparation, concentration and a lot of efforts to complete. Same is going to the mountain in the winter. But the reward at the end is worth it.
Инструкции за ЛЕГО Mindstorms EV3 база за робот. Приставката за моторите е доста интересна. Следваме ъглите на ЛЕГО Техник, за да прикрепим моторите. При тази конструкция е малко трудно да се завива наляво и надясно. Но, ако трябва да превъзмогнете толкова високо препятствие, това е един от начините да го направите.
С този робот може да използвате всякакви видове колела - EV3, NXT или други. Няма особено значение.
For rovers in other worlds, getting stuck is definitely not okay! Teams of rovers can help each other, but a lone rover needs to be very careful.
(mission descriptions source: https://www.first-lego-league.org/)
Тази конструкция представлява част от катапулт, чиито инструкции можете да намерите тук.
This robot attachment could be used to throw objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate a principle and one example of an attachment for throwing. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
Този модул е предназначен за тактилната игра за памет и се прикрепя за базата на робота. Този модул използва сензор за цвят, за да засича цветовете на колелото си.
Тази конструкция представлява част от катапулт, чиито инструкции можете да намерите тук.
After the success of the original Gazon robot from LEGO Education SPIKE Prime, we've decided the build a similar robot, but from LEGO Mindstorms Robot Inventor 51515. Teams are participating in the FIRST LEGO League competition with a LEGO Mindstorms Robot Inventor set and we know it will be helpful. But this robot can not be build from a LEGO Mindstorms Robot Inventor 51515 as the set has only one Color sensor. We've build a version of the Gazon robot to address this specific limitation.
Some say it is cute, other say it is scary, but that's the way bunnies are. You never know if you are dealing with a cute little rabbit or a monster trying to destroy the universe as we know it.. you know, bunnies. This SPIKE bunny was designed by Ahmad Sahar and the building instructions were inspired by this video. and prepared by FLLCasts team as 3D building instructions.
Това са инструкции за моделите на мисии Swing и Traffic Jam. И двете мисии са в торбичка 9 от комплекта за FIRST LEGO Лига 2019-2020 City Shaper.
This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.
The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program
Воли е вдъхновен от робота Шпионски мобил. Този малък робот е построен да измерва разстоянията около себе си и да изчислява обема на стаята, в която се намира.
Building instructions for the Pinless Rubber Band Attachment:
This is a distance sensor attachment for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. This attachment is place on the robot whenever we want to work with the LEGO Education SPIKE Prime Distance Sensor.