Building Instructions
Filters:
Ларви - ЛЕГО СПАЙК Прайм робот ларва
Ларви е СПАЙК Прайм робот, който се движи като ларва или гъсеница. Роботът използва голям мотор, за да се свива и разпъва! С двата средни мотора, робота завърта 4 гуми по лице и изправени, когато трябва, за да може да се движи напред!
Можете да намерите програма за робота тук: Програма за Ларви - ЛЕГО СПАЙК Прайм робот
- #988
- 21 Jul 2020
Chain Monster - a SPIKE Prime Box Robot commanding the attachments with chains
We took a stab at building a box robot entirely with chains. It is difficult to find these chains. They were part of the original LEGO MINDSTORMS NXT Robots, but we had an idea. Can we power the whole box robot and all the attachments with the chains. This allows us to do a nice demonstration when and how chains could be used.
To build the robot you will need about 180 of these the chain pars - 3711a. They could be found from NXT and from some technic sets.
This robots require additional parts on top of the LEGO Education SPIKE Prime and LEGO Education SPIKE Essentials. Check out the additional parts required.
- #1599
- 18 Jan 2023
Active attachment for changing gear orientation
Building instructions for a LEGO Mindstorms EV3 Active attachment for changing gear orientations
- #175
- 16 Oct 2014
- 1
Франческо - Проста ЛЕГО EV3 количка със задно задвижване и диференциал
Инструкции за конструиране на проста Лего количка, използваща голям мотор за завъртането на предните колела и среден мотор с диференциал за задвижване на задните колела.
- #405
- 13 Jan 2018
Rack attachment for lifting built with LEGO Mindstorms EV3
This construction demonstrates one way of using а rack with a gear wheel. It allows to turn circular motion in to a liniar one.
- #638
- 01 Feb 2019
- 4
Active attachment for changing gear orientation - part 2
Building instructions for a LEGO Mindstorms EV3 active attachment for changing gears orientations. This is the second attachment from the series.
- #120
- 23 Oct 2014
- 1
Хващач от ЛЕГО Mindstorms версия 2
Това е втора версия на Хващач от ЛЕГО Mindstorms. При него се използват четири зъбни колела, които задвижват лостовете.
- #422
- 01 Apr 2017
Calix - LEGO SPIKE Prime carrying robot
- #1058
- 04 Aug 2020
Multi-axles mechanism instructions
Building instructions for a LEGO Mindstorms EV3 Multi-axles mechanism
- #71
- 03 Jan 2016
- 1
Reusable LEGO Geared Attachment 3
One LEGO gear is powering two LEGO Gears and at the end, from one motor we rotate two axles in opposite directions. Follow the building instructions.
- #216
- 16 Nov 2014
- 1
Reusable Geared attachment 1
This LEGO Mindstorms Attachment has three gears, one frame and two axles. The goal of the attachment is to use the gears to change the direction in which the motion is transferred.
- #212
- 16 Nov 2014
- 1
Mechanism for dropping a LEGO human carrier
Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.
The attachment is constructed from LEGO Mindstorms EV3 sets.
- #352
- 08 Nov 2017
- 1
Swing game - LEGO SPIKE Prime robot
Swing game is a SPIKE Prime robot that is a game played by two people. The goal of the game is for both LEGO people to reach the center of the swing, without it tipping over on either side. The LEGO poeple are placed on motors, connected to two technic gear racks, that move along the swing. The motors are moved by two controllers, one using a color sensor and one using a Large motor. If one of the LEGO people moves too far without the other doing the same, the swing will tip and game over! Good luck and have fun!
- #1047
- 24 Jul 2020
Reusable LEGO Geared Attachment 2
A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.
- #214
- 16 Nov 2014
- 1
LEGO Gear Demonstration model
These are building instructions for a LEGO Mindstorms EV3 demonstration model. In the tutorial, we are using it to demonstrate the working and relations of LEGO Gears.
- #219
- 21 Dec 2014
- 1
Ambulance and Truck Robot Attachment
If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.
Built from LEGO Mindstorms EV3 parts.
- #75
- 11 Oct 2015
- 3
LEGO Mindstorms Catapult Motor and Touch Sensor
Building instructions for a LEGO Mindstorms Catapult Motor and Touch Sensor that are used for triggers for firing objects
- #238
- 18 Jan 2015
- 1
FLL 2019: Attachment To Accomplish The City Shaper Traffic jam (06) Robot Game Mission
This is the attachment to accomplish Fll 2019 M06 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial to do.
- #1184
- 27 Sep 2020