Bag 3 - Immersive Experience - FIRST LEGO League 2023-2024 MASTERPIECE
These are 3D Building Instructions for the Immersive Experience mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
- #1681
- 15 Aug 2023
These are 3D Building Instructions for the Immersive Experience mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 5th mission of the FLL Cargo Connect competition.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 3rd mission of the FLL Cargo Connect competition.
This is a heavy lifting attachment and it can lift mission models vertically. It is build entirely from LEGO MINDSTORMS Robot Inventor 51515 parts. This is one of the more complex and interesting attachments that we demonstrate in the course and it show how a few gear wheels and levers could be used to change the motion from circular to linear. This is powerful concept that could be very valuable during FIRST LEGO League competitions.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
Луна 3 идва от съветският космически кораб със същото име, който е направил първата снимка на тъмната страна на Луната.
Този робот е направен да държи телефон, който може да се използва като камера за да направи снимка на тъмната страна на Луната. Роботът е сравнително прост, използва два големи EV3 мотора за да се задвижва и също има поставка за теефон. Тя е направена да работи с повечето телефони, но лесно може да я промените за да работи с всяка камера.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
This is a little robot that doesn't like its switch touched. It will return the switch back every time it's touched and react in a variety of ways.
The program for controlling the robot is available at /programs/wc7iqy-program-for-ev3-finger-bot
It's a VEX IQ robot base with all VEX IQ Sensors. The robot has 1 x Gyro, 1 x Ultrasonic, 1x Color Sensor, 2 x Toch Sensors, 1 x Touch Led Sensor.
Инструкции за третия модул на робота Ugbroid - задвижващ механизъм.
These are 3D Building Instructions for the Expert Delivery mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
These are 3D Building Instructions for the Augmented Reality Statue mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.
This is the second type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
These are the building instructions for the Writing attachment for Tricky - the Mindstorms 51515 Robot Inventor's smallest robot. If you build this attachment, you can program Tricky to write different things with its pen by moving. The animation in the instructions below will give you a better perspective for its abilities.
You can find the LEGO set, with which this was built, by following this link.
You can find other attachments for Tricky, by following the links below:
You can find constructions created to play with Tricky, by following the links below:
Това е добавка за Уелдър – супер обикновен мотоциклет, направен от ЛЕГО Mindstorms EV3. Тя позволява на мотора да се движи само на задната си гума и по този начин да прави готини трикове. Какви по-точно ще трябва да откриете сами!
Това поле може да се разпечата на винил и съдържа 15 продукта и 7 баркода. Баркодовете са асиметрични и за разлика от истинските баркодове дават различни резултати в зависимост от това дали се прочетат от ляво на дясно или от дясно на ляво.