Типични причини моторите да не се движат Pro Preview

Ще разгледаме типичните причини защо роботът ви изобщо не иска да се движи.

  • #369
  • 15 Feb 2017
  • 2:23

Грешен порт

По подразбиране двигателите трябва да са свързани към портове В и С. Ето защо, ако моторите не се въртят, първо трябва да проверите портовете. Проверете дали връзките на кабелите съответстват на порта, настроен в блокчето за движение в програмата.

Кабелът само изглежда свързан

Трябва да натиснете кабела в порта му докато чуете лек щракащ звук.
Втората ви стъпка, след като проверите за съответствието на портове и кабели, е да проверите дали кабелите са добре вкарани в портовете.

Можете да покажете на някого, че кабелът му не е свързан надеждно, като раздрусате робота и покажете, че кабелът сам излиза от порта си.

English

This here is our program for moving forward but sometimes the connection between the cable and the robot might not be good enough and the program won't work. So, let's stop and discuss this program.

In the program we've configured the two ports for our robot to be B and C. And now the program works. The robot moves forward. But if we just move this cable not to port C but to port D and start the same program you see that the whole robot does not move. And the diode here is blinking. This happens because the robot is trying to direct both motors to move forward and there is no motor on port C. And because there is no motor the brick detects that there is no motor cannot get some feedback from the motor and it just stops. So, what you should do now if you see this screen and this blink you just press on back to stop the program. It might be possible that the port is correct but when connecting the cable you have not pushed the cable.

So, you've not heard the click. This is the click. But sometimes you can just add the cable like this, start the program, it'll work but because you've not clicked while working the cable will move.

It's difficult to replicate it because these are good cables but it happens many times in the classroom like this. You see, it seems that the cable is connected but it's not connected and the whole program does not work.

Курсове и занятия включващи този Урок

Този Урок е използван в следните курсове и занятия.

Image for EV3 Phi. Introduction to robotics with LEGO Mindstorms
  • 92
  • 220:20
  • 36
Image for First challenge - Yo Yo task
  • 14
  • 0
  • 4
  • 3d_rotation 0
Image for Instructors Remote Training
  • 136
  • 280:11
  • 156
Image for How to make the robot move
  • 24
  • 0
  • 11
  • 3d_rotation 0
Image for Роботика с LEGO - Ниво 1.0 - Приключение в Космоса
  • 126
  • 123:52
  • 150
Image for Занятие 1 - Движение като Йо-Йо
  • 19
  • 4
  • 9
  • 3d_rotation 1
Image for Забавното ниво - въведение в LEGO роботиката чрез игри
  • 50
  • 58:06
  • 32
Image for Занятие 1 - Въведение
  • 35
  • 0
  • 7
  • 3d_rotation 1
Image for Ниво A - Въведение - Роботика с LEGO
  • 142
  • 133:42
  • 187
Image for Занятие 1 - Движение напред
  • 12
  • 5
  • 8
  • 3d_rotation 1
Image for Python за EV3 LEGO Mindstorms - ниво 1
  • 74
  • 28:18
  • 114
Image for Занятие 1 - Сервитьор
  • 14
  • 4
  • 6
  • 3d_rotation 1