Most of the published video tutorials that you could learn from.
In this tutorial we would introduce you to the concept of loops using this VEX EDR Robot. As a final result we would have a program that makes the robot move in a square and not by repeating the same instructions for move and turn four different times.
- 10 Apr 2017
During the FIRST LEGO League competition you can hardly use the sound block, because of the noise from the excitement around the tables, but it has a few interesting applications. I this video lesson I will show you how to use the sound block and build a program that makes the robot say which color it sees.
- 12 May 2013
Едновременно използване на блокчетата за дисплей, звук, изчакване и движение.
- 28 Apr 2017
Насърчаваме ви да изучавате софтуера сами.
- 23 Apr 2017
Try to solve the challenge of this module and observe the cup.
- 09 Apr 2017
Смята се, че е очевидно и интуитивно как да свържем компютъра и робота. Все пак ще разкажем подробно как се прави, за да знаем, че е ясно на всички.
- 04 Feb 2017
Find a plastic element. Cut it to 200mm by 140mm and attach this plastic plate to the front of our FIRST Technical Challenge Tetrix Robot.
- 20 May 2017
Experiment with the software for about five minutes, before we even give you any directions.
- 19 Apr 2017
Here is Mintonet. The robot is created to be used in pairs, but you can also build just one and practice your shooting with a box. The robot works with plastic balls between 5 and 7 cm. Using the ultrasonic sensor it can detect either its partner or a box and then it shoots. How many balls can you score?
- 26 Jun 2019
Level 1 from "FLLCasts Certified VEX IQ Robot Driver - Class R1" certification path is to start on the border of the field, move through to the last obstacle, turn and return back to the border of the field.
- 17 Mar 2019
Starting leJOS might be very problematic, since you need to install a few libraries and make some configurations. In this video tutorial I am showing a step-by-step guide on how you could install leJOS on your Ubuntu Linux. And it is quite easy.
- 26 Apr 2013
Overview of the big task that we want to achieve in this module.
- 21 Apr 2017
This video tutorial shows how the LEGO Mindstorms EV3 Ninja Motorcycle robot works. It's a nice demonstration with the robot moving forward, backward, and slightly to the left and right.
- 12 Jun 2019
We challenge you before we give you the theory: browse in the software and try to achieve the behavior in the video below.
- 21 Apr 2017
How far will the robot move for one second?
- 25 Apr 2017
The more advanced task is to more in a polygon. This would require calculating the degree of each of the turns and RobotC is a language in which you could implement this math calculation very easily.
- 15 Apr 2017
- 26 Jun 2019
Level 2 from "FLLCasts Certified VEX IQ Robot Driver - Class R1" certification path is to start on the border of the field, move through to the last obstacle, turn and return back to the first one. turn once again and go up to the second one, turn around one last time and sprint towards the finish line at the border of the field.
- 18 Mar 2019
Attach an axle to the front of the robot. Find a similar one, or modify the FTC Tetrix robot to accommodate the new axle.
- 14 May 2017
Here is Iknathir - a LEGO Paper Plane Launcher. Just take a piece of paper, fold it to create a paper plane, place it on top of Iknathir, press the lever forward and the plane will be launched in the air. If you are not sure how to make a paper place, we got you cover! Just go to the following tutorial - How to make a simple paper plane. Feel free to experiment with the structure of the plane. How far can your plane go?
- 25 Jun 2019
In this tutorial, we set the task of implementing another figure with the robot - a triangle.
- 14 Apr 2017
For Level 3 you need to slalom along the field. Start on the border of the field move forward until the first obstacle. Turn after it, continue forward, then turn around the second obstacle, continue forward and turn around the last obstacle. Again continue forward, turn around the second obstacle, continue straight around the first obstacle and sprint towards the finish line at the border of the field.
- 19 Mar 2019
This is the task for you. We've shown you in the previous tutorials how to do it, how to use a drill and a hacksaw and a grinding stone to cut and shape a PVC pipe. Now it's your turn. Don't forget to show us pictures -> right here in the comments section
- 12 Jun 2017
- 26 Jun 2019