Tetrix FTC. Cut a pipe to a specific length
In this tutorial, we record an example of how to cut the pipe to the desired length with a hacksaw. Cutting with a hacksaw is very common during FIRST Technical Challenge Preparation
- #580
- 24 Jun 2017
In this tutorial, we record an example of how to cut the pipe to the desired length with a hacksaw. Cutting with a hacksaw is very common during FIRST Technical Challenge Preparation
How to place the cup on the robot so that the challenge is challenging.
Attach an axle to the front of the robot. Find a similar one, or modify the FTC Tetrix robot to accommodate the new axle.
The power in the car comes from the batteries. The batteries are in a batteries holder. About 5 of them. Two cables are connected to the batteries holder. It is very important to identify which of those cables is the plus and which is the minus.
Take the hacksaw, the drill and let's cut the pipe.
The robotics tutorial is about the shape of the pipe its advantages and disadvantages.
This is the task for you. We've shown you in the previous tutorials how to do it, how to use a drill and a hacksaw and a grinding stone to cut and shape a PVC pipe. Now it's your turn. Don't forget to show us pictures -> right here in the comments section
This robotics tutorial is about the different tools that you could use to collect the balls in a pipe on a FIRST Technical Challenge competition.
The course is designed to be used with almost every remote controlled car. The process of opening the car will be different for different cars but there are basic principles that you could follow.
We all know that it is very hard to control students’ attention even in an in-person classroom and it is even harder in a remote learning environment from home.
Now with remote learning, a teacher must be even more engaging, and the best teachers integrate more and more playful based learning so that students are interested and involved.
In this article, we will share how to achieve that, what are the best practices and benefits and how to convince your decision-makers to allow more play-based learning in your virtual and physical classrooms.
В началото на група се подарява папка на ученика с материали свързани с Робопартанс. Съдържанието на папката е:
визитка, картонче с името и място за паролата, календар на занятията в срока, правила за поведение, други подаръци.
Целта на това занптие е учениците да се забавляват с нов робот.
Целта на това занятие е учениците да се запознаят с настройката за измерване на отразената светлина на цветния сензор и да си припомнят как се следва линия.
Трети колела, промени по роботите, учениците могат сами да изберат задачата си. Опитайте се да се забавлявате с учениците, както и да им помогнете да приключат задачите си. Ето няколко съвета как да проведете урока.
Има два вида на инерция с които да ви запознаем. За единият се сещате интуитивно, другият е по-скрит. И двата трябва да се имат предвид когато строите собствени роботи, особено вбъдеще за състезания.
Следва първата ви задача и ще ви покажем как да използвате инструмента Задачи.