Building Instructions

This is a steering mechanism made for LEGO Mindstorms EV3, which uses the Technic steering link to steer two wheels. To move, the mechanism uses a medium motor. This module can be combined with others to create a cool steering robot.

This is a mechanical cannon that uses the mechanical strain on the plastic LEGO beams to shoot a ball. Because of that the Ball size is very important. It is made to work with standard balls for a ball pool and even better with 41250 52mm LEGO Ball. The mechanism is powered by an EV3 Large motor.

This module is made to look and move like the beak of a bird! It uses two technic steering links powered by a medium motor to close and open! It can be combined with other modules to make the best bird robot! This module is a part of Lintu - a LEGO Mindstorms EV3 Kiwi bird robot.

- you should attach it to the motor, depending on the orientation of the motor

- you should attach it to the motor, depending on the orientation of the motor.

This is the initial construction of a catapult. The base on which we will place the rest of the robot. The goal of this construction is to give the catapult the ability to rotate.

This is the attachment to accomplish Fll 2019 M10 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

This is a module that is made to look like a mantis' pincers and head. The pincers are powered by a medium motor and the head has an ultrasonic sensor for eyes. This module is used in Mantissa, a LEGO Mindstorms EV3 mantis robot.

Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.

Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.

Purpose

We want students to be able to easily find the parts and to put the parts back in the designated compartments.

Printing instructions

Files are printed on both sides of 160-gram sheet of paper A3 format.

The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.

To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.

Turning direction

We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.

Building instructions for Module 1 of the Modular EV3 LEGO Mindstorms vehicle - the Trunk.

The goal of this robot is to teach students how to build modular robots. This first part is just one of the modules. 

LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.

- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.