- 01 Jan 2018
Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions.
- 06 Oct 2015
These are instructions on how to build the:
- Red Building Units
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
- 21 Aug 2019
This is the field used in FLLCasts Off-season Challenge 2019. The pdf should be downloaded and printed 1:1. It is best if it is printed on durable canvas such as vinyl. Although we do not recomend it, the field can be printed on regular paper.
- 22 May 2019
- 01 Jan 2019
Building instructions for this LEGO Mindstorms EV3 attachment for the FIRST LEGO League Nature's Fury robotics competition
- 18 Nov 2015
This robot is made to serve the best tea in the whole continent! It is based on the Easy Bot from EV3. As its predecessor it is based on LEGO Mindstorms EV3. It uses two large motors to move around. The best part of the robot is the cup holder, that has a cool cup that shows the KISS principle.
- 28 Jan 2020
This are the building instructions for a mechanism, collecting cubes. It is designed as an attachment for VEX Robot Base 5 and can be used to solve the VEX IQ Challenge High rise 2014-2015.
- 16 Jul 2017
Building instructions for Module 1 of the Modular EV3 LEGO Mindstorms vehicle - the Trunk.
The goal of this robot is to teach students how to build modular robots. This first part is just one of the modules.
- 01 Mar 2017
This is a simple chassis that uses two motors to control the robot and two omni wheels at the back for greater maneuverability. It also have low center of the mass which makes it more stable for higher attachments.
The program for this robot is at programs/uxgw6b-roberto-bot-chassis-controls-with-modkit
- 06 Feb 2019
This is a simple chassis that uses two motors to control the robot and two omni wheels at the back for greater maneuverability.
The program for this chassis is at programs/c0oq4l-pesho-bot-chassis-controls-with-modkit
- 11 Dec 2018
Where do you keep your robots? We like to keep them ordered....
Actually we lied. It is almost always a mess wtih boxes and parts everywhere. We had sum FUN building this IKEA Billy and putting some of the FIRST LEGO League Mission Models.
- 20 Nov 2018
- 16 Nov 2014
The data log from the experiment when moving forward and keeping straight with an implementation for Proportional compensation.
- 10 Jan 2018
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
- 01 Aug 2017
Building instructions for Tower Trunk. The trunk is designed to store cubes and then drop them on a desired spot. It can be used alongside Cube Collector 2 as an attachment for VEX Robot Base 1.
- 16 Jul 2017
Building instructions for building rear wheels - module 4 version 2 of the Ugbroid.
- 01 Mar 2017
- 16 Aug 2015
- 14 Jun 2015
These are building instructions for a Launcher Gate. The gate is used in connection with the LEGO WeDo 2.0 lauchner that lauches objects.
- 18 May 2019