Bag 3 - Immersive Experience - FIRST LEGO League 2023-2024 MASTERPIECE
These are 3D Building Instructions for the Immersive Experience mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
- #1681
- 15 Aug 2023
These are 3D Building Instructions for the Immersive Experience mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 5th mission of the FLL Cargo Connect competition.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 3rd mission of the FLL Cargo Connect competition.
This is a heavy lifting attachment and it can lift mission models vertically. It is build entirely from LEGO MINDSTORMS Robot Inventor 51515 parts. This is one of the more complex and interesting attachments that we demonstrate in the course and it show how a few gear wheels and levers could be used to change the motion from circular to linear. This is powerful concept that could be very valuable during FIRST LEGO League competitions.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
Luna 3 comes from the soviet spaceship with the same name, that was the first to take a picture of the far side of the moon.
This robot is made to hold a phone, that can be used as a camera to take a picture of the far side of the moon. The robot is pretty simple, it uses two large EV3 motors to move around and also has a stand for the phone. The stand is made to work with most phones, but you can easily modify it to work with any camera.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
This is a little robot that doesn't like its switch touched. It will return the switch back every time it's touched and react in a variety of ways.
The program for controlling the robot is available at /programs/wc7iqy-program-for-ev3-finger-bot
It's a VEX IQ robot base with all VEX IQ Sensors. The robot has 1 x Gyro, 1 x Ultrasonic, 1x Color Sensor, 2 x Toch Sensors, 1 x Touch Led Sensor.
Building instructions for module 3 of the Ugbroid - the drive mechanism.
These are 3D Building Instructions for the Expert Delivery mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
These are 3D Building Instructions for the Augmented Reality Statue mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Basketball mission and it is the second attachment for this mission. The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
We've deprecated it because we build a better attachment
This is the second type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
These are the building instructions for the Writing attachment for Tricky - the Mindstorms 51515 Robot Inventor's smallest robot. If you build this attachment, you can program Tricky to write different things with its pen by moving. The animation in the instructions below will give you a better perspective for its abilities.
You can find the LEGO set, with which this was built, by following this link.
You can find other attachments for Tricky, by following the links below:
You can find constructions created to play with Tricky, by following the links below:
This is an addition for Welder - super simple Motorcycle built with LEGO Mindstorms EV3. It allows the motorcycle to drive on its back wheel and perform cool tricks that way. Exactly what tricks, you will have to find on your own!
This is a print ready vinyl mat that contains 7 barcodes and 15 products. The barcodes are not symmetrical and can yield different product result depending from the scanning direction - left to right or right to left. This mat is used in lesson 6 of level 3.5 Measurement tools.