We've compiled a list of controllers that are used by manufacturers in Remote Control cars and how to identify where is the plus and where is the minus on the controller.
To access the full video please subscribe to FLLCasts.com
- #739
- 22 Feb 2018
TL. DR.
If it says VCC or + it is a "Plus". If it says GND or - it is a "Minus"
Hummer example
On the pictures, you could see the front and the back of the controller. On the front, there is a yellow rectangle and on the back, you could see the location of the same yellow rectangle. Same applies to the blue one.
Courses and lessons with this Tutorial
This Tutorial is used in the following courses and lessons
Perfect STEM course. Module 1 - Smart Car with Raspberry PI
Disassemble a remote control car. Change the brain of the car with a smart computer like Raspberry Pi. Build a smart device with artificial intelligence that you could control from your phone and that could freely navigate itself in the real world and on the Internet. Use your hands. Develop programs for your robot and your phone. Be curious and invent.
The perfect course lives up to its name. You move through the content, we check it and return feedback to you.
In the end, you should be able to program and design smart devices that would make the world a better place. For everybody age 12+, 16+, 21+, 35+, etc. The hardware costs about 150$ and you could also use it in many of the other courses that we are planning to release.
- 118
- 42:47
- 136
Marking Motors and Lights components in the Car
After opening the car you should mark all the cables before our next step is to disconnect the cables. Why is this important? Because if you lose track of which cable leads to where you will not be able to make the car work
- 5
- 0
- 3
- 3d_rotation 0