Building Instructions -

• FIRST LEGO League

We have to admit. This is quite an interesting missions. There is a Manhole cover and it must be turned upside down. Well, the robot must turn it. Again LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro is used as a base for the Robot.

A simple active attachment that could be added to the Box Robot Chassis.

Here is another great example of a large multi-purpose attachment used in FIRST LEGO League competitions. This one is specifically for the 2017-2018 Hydrodynamics competitions and is doing a number of missions. (01) Pipe removal, (06) Water Treatment and (08) Manhole cover. 

The attachment consists of two parts. The first part is placed on the robot while the second part is in front of the robot and the robot pushes it. While working on the field the robot leaves the second part on the Water Treatment plant and when returning back collects it back and returns to base.

The goal of the attachment is for you to build it and experiment with it with the existing field. Use Box Robot 2 as a robot base on which to add the attachments.   

Two missions in one. This attachment accomplishes the Hydrodynamics Fountain and Faucet missions from the FIRST LEGO League Hydrodynamics 2017-2018 competitions. The attachment shows a really interesting and widely used approach of a single attachment that is used for two, three and even more missions. This is a standard practice for many of the advanced teams, especially those that reach the finals. The based of the robot is the LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro 

Probably the largest multi-purpose FLL attachment at FLLCasts. These attached is doing a number of missions at once. 4 of them. You attach it to the robot and start the program. The robot moves and accomplishes a number of missions using only this attachment. At it also has a lot of parts. It is quite large and you can not build it from a single set. But that's ok because you are preparing for a competition, right?

These are building instructions for an attachment accomplishing the FIRST LEGO League 2017-2018 Slingshot mission. The based of the robot is LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro

Building instructions for a LEGO Mindstorms EV3 active attachment for changing gears orientations. This is the third attachment from the series.

For the FIRST LEGO League 2016-2017 Animal Allies we prepared an attachment for lifting the robot. The idea of the attachment is to show how you could lift the whole robot with a system of gear wheels, levers, and scissors constructions.

Built mainly from LEGO Mindstorms EV3 parts but could probably be constructed from NXT sets.

Maze Runners are one of the very popular robotics competitions. But there are a lot of limits that the robots must comply with. Like the size of the robot. 

This here are building instructions for a very small maze runner robot, build with LEGO Mindstorms EV3. It uses two tires that are technic and not Mindstorms simply because none of the Mindstorms tires fit the size limit. 

The robot has an Ultrasonic sensor and a Gyro sensor at the top. 

Kiril Mitov's most favourite attachment. To quote him "I had a really great fun building this attachment and recording the videos for it".

It's an attachment with a Rubber band and a Flywheel and a Gear Wheel and a Worm Gear. So much knowledge in just one small attachment. The goal of the attachment is to be able to have an active attachment without actually having a motor. So you can place that attachment and it will do the work for you instead of using a motor to power it. 

Build with LEGO Mindstorms EV3 set. 

When placing the rubber bands check out the tutorials

Placing the white rubber band is shown at https://www.fllcasts.com/tutorials/105-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-2 at around 05:40.

Placing the red rubber band is shown at https://www.fllcasts.com/tutorials/104-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-1 

Building instructions for a LEGO Mindstorms EV3 Active attachment for changing gear orientations

The NXT Competition robot was the first competition robot we designed. For most of the part in 2011-2012-2013 it was working really great. Than EV3 was released

Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions. Compared with previous versions of this robot, this one has a Gyro Sensor. 

A LEGO Mindstorms construction for taking loops. Uses the same principle as a carabiner.

Building instructions for a LEGO Mindstorms EV3 active attachment for changing gears orientations. This is the second attachment from the series.

Building instructions for the Pinless Rubber Band Attachment:

Attachment part of a series of robot attachments for accomplishing the FIRST LEGO League 2013 competition. This specific construction lifts the two vehicles. It uses rubber bands for locking the levers. Take a look at the video tutorials for details explanation on how it works.

Build from LEGO Mindstorms EV3 parts.

Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition.    The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time