Building Instructions -

• Attachments

This is a robot attachment that could be placed on the side of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the side of the robot. This specific robot attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an attachment that could be easily detached after a mission is accomplished. It's built with LEGO Education SPIKE Prime parts and it demonstrates an important principle for building attachments for robotics competitions like FIRST LEGO League/World Robotics Olympiad and others. You move with the robot, you complete the mission and you leave the attachment on the field when the mission is completed. In this way you save time when adding the attachment as it is most of the time pinless and takes a fraction of a second to put it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This LEGO attachment connects a LEGO Mindstorms EV3 Motor with a LEGO Technic Linear Actuator. The connection is through a couple of gears which makes the whole instructions quite interesting and useful as an example. 

The attachment was used during FIRST LEGO League 2014 Robotics competition.

This is the forth type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.

These are building instructions for one of the greatest LEGO Mindstorms attachments that we've built. Super simple and easy to follow and at the end, you have an attachment with a rubber band that controls a lever and that could lift objects from the field. It could lift them up. Also because it is with a rubber band you don't need a motor and you could use the motor for other attachments. 

This robot attachment in inspired by one of the most interesting missions we've seen at FIRST LEGO League competitions - the Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018 . The attachment demonstrates how you could flip an object. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is the attachment of Team "Nightbeast", with which they solve M01 and M02 from FLL Into Orbit Challenge

Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.

SIngle robot attachment, many points. 

Probably the simples trick for pinless attachments that we've found. It is a construction build in just three steps. Simple as that. But it has a lot of potential to teach you how to use pinless attachments. Pinless attachments are very useful during FIRST LEGO League and World Robot Olympiad competitions. 

This is the first type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it use gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This attachment accomplishes the Into Orbit Extraction mission from the FIRST LEGO League Into Orbit 2017-2018 competitions. The based of the robot is the SUV Competition Box Robot from LEGO Mindstorms EV3.

The program for this attachment is at https://www.fllcasts.com/programs/2hpdg9-fll-2018-attachment-to-accomplish-the-into-orbit-extraction-05-robot-game-missions-program.

Building instructions for the LEGO Mindstorms attachment using Rubber Bands

With this LEGO Education SPIKE Prime attachment we accomplish the basketball mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to put the ball into the basket and to have the basket up at the end of the round. This is a complex attachment. It uses gear wheels and warm gears to transfer the power from the motor to the top of the attachment. At the top of the attachment there is a wheel with a rope. The rope is build with LEGO Education SPIKE Prime parts. If you have the chance, use a different LEGO rope, but if you don't that this one will be ok.

This is a self aligning passive attachment for rendezvous and meeting between the tube module and the habitation hub.

The program for this attachment is Self Aligning Module Attacher for M06 - Space Station Modules.

There is another program at Self Aligning Module Attacher for M06 - Space Station Modules - another program.

This is the attachment of Team "Nightbeast", with which they :
1. Eject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer.
2. Crater Crossing
3. Tries to score a meteoroid( tries to shoot a ball)
From missions M03,M04 and M014 from FLL Into Orbit Challange

This attachment presents a way to mechanically align the robot to a mission model and solves the Cloud mission from FLL 2014. 

With this attachment we complete the Elevator and Steel construction for the FIRST LEGO League 2019-2020 competition. The attachment is placed on the Whakatae - LEGO Education SPIKE Prime Competition Box robot

Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult. 

This robot construction itself was used in the FIRST LEGO League Senior Solutions competition