Building Instructions -
Filters:
Building instructions for the short arm
- you should attach it to the motor, depending on the orientation of the motor
- #116
- 12 Apr 2015
- 1
Building instructions for the long arm
- you should attach it to the motor, depending on the orientation of the motor.
- #117
- 12 Apr 2015
- 1
Side attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This reusable attachment could easily be placed on the side of a LEGO MINDSTORMS Robot Inventor robot and accomplish different missions that require the robot to interact with mission models. It uses gear wheels.
- #1456
- 29 Apr 2022
Push-Pull attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.
- #1506
- 12 Apr 2022
FLL 2020: Attachment for Tire Flip mission
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
- #1320
- 26 Jun 2021
Building instructions for the base of the attachments
- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.
- #115
- 12 Apr 2015
- 1
Drop attachment with LEGO MINDSTORMS Robot Inventor, with buidling instructions
This attachment demonstrates the principle of dropping a part inside a container. It uses parts only from the LEGO MINDSTORMS Robot Inventor 51515 set. The goal of the attachment is to release a lever that is holding the wheel.
- #1490
- 29 Apr 2022
Pinless attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This is an attachment positioned below the robot and used for when we need to push something with the robot. It keeps the cargo in place while pushing. In this way we can achieve a consistent behavior with the robot, which is what we all want
- #1491
- 24 Mar 2022
FLL 2020: Attachment for Cell Phone mission
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Cell Phone mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
- #1326
- 01 Jul 2021
Attachment for FLL 2020 Slide mission
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Slide mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
- #1319
- 25 Jun 2021
Truck Robot Attachment for FLL Nature's Fury
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
- #91
- 15 Nov 2015
- 1
Rubber band LEGO attachment without motors
Building instructions for the Rubber Band Attachment
- #188
- 28 Jun 2015
- 1
Building instructions for the first slide for the robotics insert
- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;
- #152
- 17 May 2015
- 1
Flip attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.
- #1511
- 18 Apr 2022
Reusable geared attachment 4 from LEGO MINDSTORMS Robot Inventor, with building instructions
Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.
- #1501
- 18 Apr 2022
Easy Detach attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
We use this attachment to discuss how an attachment and a module from LEGO Mindstorms Robot Inventor could be build in an easy to detach fashion. Check out the tutorial in the lesson for this attachment for more information about Detachable Modules
- #1494
- 08 Apr 2022
FLL 2018: Nightbeast Multi-purpose Attachment. M06, M10, M12
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
- #733
- 17 May 2019