WRO Better Robot for Collecting Ping Pong Balls
Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3
- #159
- 16 Dec 2015
- 1
Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3
Robot building instructions for a World Robot Olympiad with a large container used for collecting ping-pong balls
These are building instructions for one of the greatest LEGO Mindstorms attachments that we've built. Super simple and easy to follow and at the end, you have an attachment with a rubber band that controls a lever and that could lift objects from the field. It could lift them up. Also because it is with a rubber band you don't need a motor and you could use the motor for other attachments.
Another example for a quick pinless attachment build with LEGO Mindstorms EV3 robots.
This is a very funny robotics hand that you could place on your hand and control with your fingers. Actually quite funny to point at things, to move the three fingers. There are also many things to learn from the gears and its constructions.
It is true that it requires a lot of parts, but its worth it.
Инструкции за дистанционно управление. При него се използва сензор за завъртане, който определя посоката на кормилото, и сензор за допир, който управлява движението. Тук ще откриете инструкции за подходящо шаси.
Дистанционното управление и колата изглеждат заедно така:
Probably the simples trick for pinless attachments that we've found. It is a construction build in just three steps. Simple as that. But it has a lot of potential to teach you how to use pinless attachments. Pinless attachments are very useful during FIRST LEGO League and World Robot Olympiad competitions.
A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.
Това е робот, направен да повдига чаша, докато я държи изправена! Той използва един голям EV3 мотор, закачен за брика, за да повдига чашата на всеки ъгъл, който искате! Чашата, която ние сме ви дали е изцяло за красота, но с няколко корекции, робота може да повдига и истински чаши! Все пак внимавайте около течности!
We've separated the BigDaddy robot into a few smaller modules. This teaches modularity and gives you the option to reuse some of the modules and to look at specific modules.
Building instructions for the LEGO Mindstorms attachment using Rubber Bands
Минтонета (от англ. Mintonette) е името на една от първите версии на волейбол.
Роботът използва два сензора за допир с които да движи оръдието си наляво и надясно. За да стреля използва цветен сензор. На оръдието си има голям мотор отговорен за стрелбата и среден мотор който мести оръдието.
Инструкции за най-обикновения хващач, при който се използва само един голям ЛЕГО EV3 мотор. При него има един неподвижен и един подвижен лост.
The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.
This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.
This frame holds the motor and ev3 brick used in the catapult. The frame is placed on top of the rotating base and thus could be easily rotated. The brick could be both NXT and EV3
Лабораторията е робот, който ще провери уменията ви по програмиране. Трябва да измерите обема на балона само чрез стойностите измерени от сензорите.
Конструкцията има вентил, с който можете да изпускате балона с различна скорост.
Как точно се поставя балонът в робота е пояснено в този урок.
Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult.
This robot construction itself was used in the FIRST LEGO League Senior Solutions competition