Модели за мисии Swing и Traffic Jam от FIRST LEGO Лига 2019-2020 City Shaper
Това са инструкции за моделите на мисии Swing и Traffic Jam. И двете мисии са в торбичка 9 от комплекта за FIRST LEGO Лига 2019-2020 City Shaper.
- #856
- 21 Aug 2019
Това са инструкции за моделите на мисии Swing и Traffic Jam. И двете мисии са в торбичка 9 от комплекта за FIRST LEGO Лига 2019-2020 City Shaper.
This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.
The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program
Building instructions for the Pinless Rubber Band Attachment:
This is a distance sensor attachment for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. This attachment is place on the robot whenever we want to work with the LEGO Education SPIKE Prime Distance Sensor.
Attachment part of a series of robot attachments for accomplishing the FIRST LEGO League 2013 competition. This specific construction lifts the two vehicles. It uses rubber bands for locking the levers. Take a look at the video tutorials for details explanation on how it works.
Build from LEGO Mindstorms EV3 parts.
Space is quiet and beautiful, but with almost no heat, air, nor air pressure, it could freeze, suffocate, and boil you all at once! Help our spacewalking astronaut “Gerhard” get to safety.
The robot needs to get Gerhard’s body into the airlock chamber.
Scoring Requirements
(mission descriptions source https://www.first-lego-league.org/)
Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition. The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time
This is a robot attachment that could be placed on the side of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the side of the robot. This specific robot attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
To live away from earth, it would help if we were good at detecting and mining resources under the surfaces of other planets, moons, asteroids, and even comets.
The robot needs to get all the core samples out of the core site model, then it has options for what to do with them as described here, and in mission M03.
(mission descriptions source: https://www.first-lego-league.org/)
This is a pinless attachment built with LEGO Education SPIKE Prime parts and it demonstrates how to use pinless attachments. The goal of the attachment is to quickly place it on the robot without any pins. The attachment is used for pushing. Check out the courses below for more information how to use the attachment. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions
Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.
The attachment is constructed from LEGO Mindstorms EV3 sets.
It is amazingly expensive to send heavy stuff like construction material into space, so scientists and engineers are instead learning how to print what they need in space, using available extraterrestrial elements.
The robot needs to get a regolith core sample and place it into the 3D printer, which will cause the 2 × 4 brick to pop out. The ejected 2 × 4 brick can then be delivered elsewhere for more points.
(mission descriptions source: https://www.first-lego-league.org/)
This LEGO attachment connects a LEGO Mindstorms EV3 Motor with a LEGO Technic Linear Actuator. The connection is through a couple of gears which makes the whole instructions quite interesting and useful as an example.
The attachment was used during FIRST LEGO League 2014 Robotics competition.
This is the forth type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This is an attachment that could be easily detached after a mission is accomplished. It's built with LEGO Education SPIKE Prime parts and it demonstrates an important principle for building attachments for robotics competitions like FIRST LEGO League/World Robotics Olympiad and others. You move with the robot, you complete the mission and you leave the attachment on the field when the mission is completed. In this way you save time when adding the attachment as it is most of the time pinless and takes a fraction of a second to put it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This is a carabiner attachment for taking loops. It is built with LEGO Education SPIKE Prime parts and it demonstrates how to successfully take loops. The goal of the attachment is to lock the loop after it catches it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions
Our Lander doesn’t have working parachutes, thrusters, or cushions, but one important feature is realistic … it’s very fragile.
Get the lander to one of its targets intact, or at least get it to base.
(mission descriptions source https://www.first-lego-league.org/)
These are building instructions for one of the greatest LEGO Mindstorms attachments that we've built. Super simple and easy to follow and at the end, you have an attachment with a rubber band that controls a lever and that could lift objects from the field. It could lift them up. Also because it is with a rubber band you don't need a motor and you could use the motor for other attachments.