Building Instructions

This is the second type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions. 

These are instructions on how to build the:

• Helicopter
• Food package

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• 2x Platooning trucks

You can find more building instructions and tips and tricks about the competition on this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Pull-up bar mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

These are instructions on how to build the:

• Basketball Post

You can find more building instructions and tips and tricks about the competition on this page.

Building instructions for this LEGO Mindstorms EV3 attachment for the FIRST LEGO League Nature's Fury robotics competition

3D building instructions for the Toy factory mission model from the FIRST LEGO League 2022-2023 competition. Find the parts in Bag 13

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Boccia mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.. With this attachment we follow the line with the robot until we reach the team mission and we use the lever on the top to push the blue box. Then we follow the line to reach the Boccia mission, and three things happen: 1. align to the mission model with the front of the attachment, 2. turn the lever to release the green boxes and 3. move the lever to push on the mission model. This is a complex mission requiring a lot of coordination from the robot. Quite interesting I must say.

This is the attachment to accomplish Fll 2019 M01 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial.

These are instructions on how to build the:

• Bench

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Red Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

FIRST^® LEGO^® League mission requirements need to be achieved by your robot through its programs and its use of equipment. You’re allowed to hand-rescue your robot, but that does cause this penalty. Be sure to pay extra attention to the rules where they talk about “Interruptions"

Penalty

• If you interrupt the robot: minus 3 each time
• Possible penalty totals: −18, −15, −12, −9, −6, −3, 0

Scoring Requirements

• Interruption needs to be observed by the referee.
• Upon penalty, the referee will place one penalty disc in the southeast triangle as a permanent interruption marker.
• You can get up to six such penalties.
• If a penalty disc comes off the triangle, it is simply returned, with no effect on score.

(mission descriptions source https://www.first-lego-league.org/)

3D building instructions for the Power plant mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 10

These are 3D Building instructions for the Fuel Truck that is part of the Oil Platform mission . The truck is build from Bag 3 of the set

This is an attachment for the top of the robot and the attachment is used for lifting different parts. It is reusable as we could change the lever and use the attachment for a number of different missions.

These are instructions on how to build the:

• Cargo plane
• 1x Gray container

You can find more building instructions and tips and tricks about the competition at this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Bench mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

This is the attachment to accomplish Fll 2019 M06 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial to do.

It also accomplish Fll 2019 M06 mission.