Reusable LEGO Geared Attachment 2
A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.
- #214
- 16 Nov 2014
- 1
A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.
Това е робот, направен да повдига чаша, докато я държи изправена! Той използва един голям EV3 мотор, закачен за брика, за да повдига чашата на всеки ъгъл, който искате! Чашата, която ние сме ви дали е изцяло за красота, но с няколко корекции, робота може да повдига и истински чаши! Все пак внимавайте около течности!
These are buliding instructions for the FTC robot and collecting attachments with it. We are doing small modifications of the push bot.
We've separated the BigDaddy robot into a few smaller modules. This teaches modularity and gives you the option to reuse some of the modules and to look at specific modules.
These are building instructions for a LEGO Mindstorms EV3 demonstration model. In the tutorial, we are using it to demonstrate the working and relations of LEGO Gears.
Building instructions for the LEGO Mindstorms attachment using Rubber Bands
Минтонета (от англ. Mintonette) е името на една от първите версии на волейбол.
Роботът използва два сензора за допир с които да движи оръдието си наляво и надясно. За да стреля използва цветен сензор. На оръдието си има голям мотор отговорен за стрелбата и среден мотор който мести оръдието.
Инструкции за най-обикновения хващач, при който се използва само един голям ЛЕГО EV3 мотор. При него има един неподвижен и един подвижен лост.
The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.
This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.
This frame holds the motor and ev3 brick used in the catapult. The frame is placed on top of the rotating base and thus could be easily rotated. The brick could be both NXT and EV3
Лабораторията е робот, който ще провери уменията ви по програмиране. Трябва да измерите обема на балона само чрез стойностите измерени от сензорите.
Конструкцията има вентил, с който можете да изпускате балона с различна скорост.
Как точно се поставя балонът в робота е пояснено в този урок.
Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult.
This robot construction itself was used in the FIRST LEGO League Senior Solutions competition
This is the "most valuable player" robot. It has many possible modifications, including ones that allow it to bend and reshape. Attachments and redesigns will soon be linked here, so you get an idea of the few ways MVP earns its title.
This are building instructions for a second mechanism for collecting cubes. This mechanism is designed for VEX Robot Base 1 and can be used for solving VEX IQ Challenge Highrise 2014-2015.
Инструкции за робот, построен от ЛЕГО Mindstorms EV3. Казва се Франкенщайн, тъй като двата мотора са противоположни.
If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.
Built from LEGO Mindstorms EV3 parts.
Building instructions for a LEGO Mindstorms Catapult Motor and Touch Sensor that are used for triggers for firing objects