Building Instructions

Here are the building instructions for the Turning attachment for Tricky - the Mindstorms 51515 Robot Inventor robot. Tricky might be the smallest robot, built with this set, but it will surprise you with its abilities to spin the ball. If you build this Turning attachment for Tricky, you could try to play a crazy little bowling game with it. As the robot is spinning the ball, you can program it to move forward and then stop, so the ball could go forward (hopefully towards the bowling pins). You can play to see who will be the first to make a strike. The Mindstorms/Duplo ball and the bowling pins are included in the set.

You can find the LEGO set, with which this was built, by following this link

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Writing attachment
4. Ball grabbing attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

The name of the game? Football!

This Kick the ball attachment for Tricky - the Mindstorms 51515 Robot Inventor smallest robot - is one of our favorites. Imagine a LEGO robot playing football. It is dribbling through the center of the field, it enters the box, it strikes and... goooooooal. What a fun game to play at home, if you decide to build Tricky with this kicking attachment. Aptly named for it’s “trick shots” with the included Mindstorms/Duplo ball. After you're ready with the construction of this robot, you'll find the instructions for building the goal frame below.

You can find the LEGO set, with which this was built, by following this link.

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Writing attachment
3. Ball grabbing attachment
4. Turning attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

Zatter is the big brother of Zat and Zatty. Zatter is here to take the load. It has a large container on its back, suitable for placing different toys inside and playing with them. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 it was designed by my wife and just slightly improved by me and my colleagues. We spend a good hour or two with the kids placing different plush toys and playing with it.

Play time for a week: About an hour

Zatty is the smaller sibling if Zat. Zatty is small and cute. It's a car on a frame with 4 small wheels and of course two mini figures riding in it or on it. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 it was designed by my 7 years old daughter and then slightly improved by me and the colleagues.

Play time for a week: About an hour

Zat is fun. Zat is great. It is a simple construction for a car with 4 large wheels. And who does not like cars with large wheels. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 we had a lot of fun with it on Sunday. It was an idea of my wife and the kids took a lot of time putting things on in and moving it around. Just put things on it and play with it.

The robot is named after the South Pole–Aitken basin, the largest impact crater in the Solar System that has been discovered on the far side of the Moon.

Astronauts, prepare to enter lunar orbit! This robot comes equipped with a stand that can hold a camera or a phone in order to take a picture of the far side of the moon. If your phone or camera does not fit, the stand can be easily modified to suit your needs. With its two motors, Aitken can make both wide and narrow circles around the Moon to ensure the perfect shot!

This robot was designed for the VEX IQ Challenge 2019-2020. It could push four hubs simultaneously. It can carry one. And it call pull itself on the bar at the end of the run. We've used four omni wheels of which the two at the back are the driving wheels.

Demo program can be found at Program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.

These are building instructions for a LEGO WeDo 2.0 Sweeper.

Fly with us. These are building instructions for a Helicopter, built with LEGO WeDo 2.0 set. 

These are building instructions for LEGO WeDo 2.0 Forklift. 

These are building instructions for a 4x4 LEGO WeDo 2.0 vehicle 

This is a vehicle that is used to help you to learn programming, to experiment with addons, attachments and constructions. It has a frame. Which is nice. A frame is always nice. 

It has two wheels at the back, but this is needed only if you have them.

This is a small VEX IQ truck that have one and only one reason to exist. The reason is to teach students to drive by practising diving with it.There is nothing that makes the Little Truckie happier than driving.

The programs for controling Truckie are at:

Truckie - "Easy" To Drive VEX IQ Program for Modkit. Left stick steers. Right stick moves

Truckie - "Hard" To Drive VEX IQ Program for Modkit. One stick for move and steer

An awesome ski-jet robot, steering with a medium motor and powered by a single large motor. It also has a pair of inclined treads, making it especially well-suited for the harsh winter terrain.

*There is a mistake in this robot you will have to find. How would you make it work?