In this video tutorial, the Minibox box robot accomplishes M08, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime box robot. In this run, the robot delivers the LEGO minifigure to its designated place and then pushes the M08 camera down the track to shoot the movie scene.
This is a 10 out of 10 tutorial in which the Minibox accomplishes M08, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime box robot. In this run, the robot should consistently and reliably deliver the LEGO minifigure to its designated place and then push the M08 camera down the track to shoot the movie scene.
This is a 10 out of 10 tutorial in which we accomplish M04, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. We use the Minibox, a LEGO Education SPIKE Prime box robot. The goal of the robot is to consistently and reliably deliver the LEGO minifigures to their designated place and then press down the M03 platform to trigger the immersive experience for the viewer in the mission model.
In this video tutorial, we demonstrate a full run of all the missions in the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition, using the Minibox - a LEGO Education SPIKE Prime robot.
These kinds of runs are extremely useful for teams looking to see how they can tackle the entire range of missions, pushing their accuracy, speed, and self-control to the limit.
This video tutorial is a 10 out of 10, demonstrating how the Minibox accomplishes four missions - M06, M07, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge.
Yes, the attachment is complex, and there are quite a few actions, but this LEGO Education SPIKE Prime box robot handles them brilliantly! Let's take a look!
This video tutorial demonstrates how the Minibox accomplishes four missions - M06, M07, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition.
It may seem challenging to achieve all of this in a single run, but with careful planning and solid programming, success is within reach! The robot is a LEGO Education SPIKE Prime box robot, equipped with rubber bands and various mechanisms. Since this is our final run, we can leave the robot on the mat, saving some time. Let's dive in!
This video tutorial showcases how the Minibox accomplishes five missions - M02, M03, M04, M05, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition.
It’s a rather complex run, as the robot uses multiple attachments and performs several actions. The MiniBox, a LEGO Education SPIKE Prime robot, is designed to leave its attachments on the mat after completing each mission. Take a close look at the attachments and study the program thoroughly before launching the robot!
In this video tutorial, the Minibox box robot is accomplishing M02 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. This robot is a LEGO Education SPIKE Prime robot that uses a detachable attachment and rubber band mechanism to achieve its goals.
When the robot presses down the mission model, it activates the detachable attachment which disconnects from the robot and triggers the rubber band mechanism, allowing it to collect the minifigure.
We know this attachment may seem a bit complex, but after a few tries, you'll definitely enjoy working with it!
This is a 10 out of 10 video tutorial, in which we demonstrate how Kufar, a LEGO Education SPIKE Prime out-of-box robot, accomplishes M03, M15, M11, and M04 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season ten times in a row!
As we said in the previous tutorial, Kufar executes several complex moves while navigating the mat. At the front, the robot features a scissor-like attachment triggered by rubber bands. At the back, there is a mechanism that carries a couple of mini-figures and the M04 art piece. Enjoy!
In this video tutorial, we demonstrate how Kufar accomplishes M03, M15, M11, and M04 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. Kufar is our LEGO Education SPIKE Prime out-of-box robot that uses a color sensor to detect the attachment frame and the respective program.
In this run, Kufar executes several complex moves while navigating the mat. At the front, the robot features a scissor-like attachment triggered by rubber bands. At the back, there is a mechanism that carries a couple of mini-figures and the M04 art piece. Carefully study the attachment, and don't hesitate to upgrade it if you like!
This is a 10 out of 10 tutorial in which the Minibox robot accomplishes the M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. The Minibox is a LEGO Education SPIKE Prime box robot that uses detachable attachments.
In this run, the robot performs five actions: it collects the M15 minifigure and throws it backward, rotates the chicken for M12, and then pushes and pulls the M13 Craft Creator mission model. All of these actions are completed in under 15 seconds!
This is a 10 out of 10 tutorial demonstrating the consistency with which the Kufar robot accomplishes M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. Kufar is an out-of-the-box LEGO Education SPIKE Prime robot, meaning you don’t need to connect attachments—just slide the brick into the attachment frames.
In this run, the robot collects the mini-figures using a rubber band mechanism, rotates the chicken with a gear mechanism, and pushes and pulls the M13 Craft Creator mission model.
This is a 10 out of 10 tutorial in which we focus on accomplishing M02 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Minibox, a LEGO Education SPIKE Prime box robot.
In this scenario, the robot uses a complex attachment that combines several mechanisms. One of these mechanisms is detachable, meaning it disconnects from the robot after pressing down and changing the scenery of the M02 Theater Scene Change. Once this mechanism is activated, it triggers the rubber band mechanism, which collects the M15 minifigure. Be sure to study the attachment carefully before attempting to complete these missions.
In this video tutorial, we are accomplishing three missions in a single run from the FIRST LEGO League MASTERPIECE season. We are using our new out-of-box LEGO Education SPIKE Prime robot, called Kufar. Have you used such robots? No? Well, let's dive deeper in the construction of out-of-box robots and see how convenient and user-friendly they can be. Take one brick with a couple of sensors and let your imagination run wild as you create the most inventive attachments.
Rubber bands in the LEGO Mindstorms sets are very handy when it comes to collecting objects, especially loops. The mechanism most of the time could work like this - an axle is pushed, a rubber band is released and a lever collects the loop.
The attachment builds on previous episodes this time using two LEGO rubber bands. When a lever is released the rubber band exerts pressure on it and moves it in a circular motion. As an example we are solving the 2012 FIRST LEGO League, Senior Solutions, stove mission (which was quite interesting as a mission)
The robot attachment build in this tutorial gives an idea on how to release a rubber band at a specific moment using a motor. It's a simple, but yet powerful technique on using rubber bands.
Rubber bands can be quite powerful. Based on several requests from you we are starting a series on using the LEGO Rubber bands available in the Mindstorms set.
Enchansing a previous attachment, but only this time we are solving the FIRST LEGO League 2012 Medicine mission. There is a lever and a rubber band. When the lever is released the rubber band activates the attachment.
Let's try to integrate more of the things we have learned into a single attachment. One that could accumulate energy, conserve it and use it at the appropriate time. All this because of a Rubber Band and a Flywheel - and if you don't know what a flywheel is you should definitely watch this videos
In part one we build an attachment that uses a rubber band to solve a competition challenge. The rubber band was released with the use of a motor. In this video we are removing the dependency on the motor and you could use the motor for other missions.
With this series of videos we are looking at FIRST LEGO League 2013 Nature's Fury competition and we are building a robot for accomplishing some of the mission. It would be a tutorial with at least four parts and we are building a complex attachment that could catch, lift and release different parts with only one motor and rubber bands. Not one, not two, but three movements with only one motor.
The Department of "throwing" is ruled by rubber bands. Impulsive power release in a short amount of time. In this video we are building an attachment that throws a ball and accomplishes the FIRST LEGO League 2012 bowling competition.
The previous rubber bands video showed a way to trigger the rubber band without a motor. This video gives one more idea on how to lift an axle and in this way release the rubber band. Use the idea for you LEGO Mindstorms robot constructions.
Using a number of axles, beams and rubber bands we collect many loops at once. This is an important part of every competition, mostly of the FIRST LEGO League.
In this tutorial of the series we would get into more details on how the flywheel works, what's its purpose and how the whole attachment is triggered with the first rubber band.
"The devil is in the details". We are improving the Rubber band attachment with a Flywheel by introducing a few small, but important modifications that make the whole robot attachment more stable and reliable. With the conclusion of the series this attachment could be used as a basis for some very interesting STEM demonstrations on energy accumulation and conservation.