Video tutorials -

• FIRST LEGO League

This video is part of a series where we show you how our Box Robot accomplished the M08 Elevator mission with 100% accuracy. The idea is that the robot pushes with enought force in the right spot, which makes the elevator turn over. The interesting thing is that the Dominator robot moves the lever after it pushes the elevator. This makes the move back possible, because the lever is now not in the way of the mission model.

This video is part of a series where we show you how our Box Robot accomplished the M10 Steel Construction mission 10 out of 10 times. The attachment is a basic lever and all the 'heavy lifting' is done by the x-y movement of the Dominator robot. This mission is one of the hard missions, because the construction is big and heavy and this requires precise movement of the robot.

This video tutorial is part of the series on how to make your robot 100% precise and accurate. We accomplish the M06. SPACE STATION MODULES mission 9 out of 10 times. The attachment works. Every time the attachment is started in successfully accomplishes the mission. It moves forward and attaches the space station module with the space station. 

This video is part of a series where we show you how our Box Robot accomplished the M07 Swing mission 10 times. This mission has a black and white line parallel right next to it, the only thing you need to figure out is how to avoid the first supporting beam of the swing. The Dominator robot waits to be clear of the beam and then uses the x-y movement of its front mottors to position the lever so it pushes the swing loose. After that the robot moves back and is ready for action again.

In this tutorial we will use Whakatae - LEGO Education SPIKE Prime Box robot to complete a mission run from the FIRST LEGO League 2019-2020 competition for the M08 Elevator mission. We accomplish 10 out of 10 in this mission. A similar approach is demonstrated with LEGO Mindstorms EV3 at FLL 2019: Accomplish every time. M08 Elevator. 10 out of 10 successful runs

In this tutorial we accomplish the Elevated places with the Whakatae - LEGO Education SPIKE Prime Competition Box robot mission. It is important to be able to go over the mission model and at the end with a simple mechanism we just push the mission model at the end

This video tutorial is part of the 10 out of 10 series at FLLCasts and we will demonstrate how to accomplish the FIRST LEGO League 2020 RePlay competition mission called Innovation Project. Our goal is to push the construction to the require place on the field. What you will learn with this tutorial is how to place a random construction in the base and push/pull it to a place on the field 10 out of 10 times.

This is a 10 out of 10 video tutorial for the Slide mission at the FIRST LEGO League 2020 RePlay LEGO robotics competition. In the tutorial we demonstrate how to accomplish the mission 10 out of 10 times. At FLLCasts we try to build the attachments to be as consistent in their behavior as possible possible. In this way you know how the attachment along with the LEGO Education SPIKE Prime or LEGO Mindstorms robot will behave.

10 out of 10 is our favorite series of video tutorials and in this one we are looking at the FIRST LEGO League 2021 RePlay competition and the tire flip mission. The goal of the mission is to flip a tire. Two tire. Perfect. We manage to do it each and every try

In this video tutorial we accomplish the Basketball mission 10 out of 10 times. We use one of the more complex attachments for the FIRST LEGO League 2020 RePlay competition. You will see an learn how to successfully and consistently complete a mission that requires the robot to put a ball into a basket and lift the basket, or lift the basket and put the ball into it.

This LEGO robotics video tutorial is a 10 out of 10 run of the one of the most complex missions at the FIRST LEGO League 2021 RePlay competition. As the mission has three parts we are measuring the success rate of each part of the mission. What you can learn from this tutorial is how to achieve three missions in a single run including line following and a lot of aligning

In this video tutorial we accomplish the Cell Phone mission from the FIRST LEGO League robotics competition, season 2020-2021. The goal of the mission is to flip a phone. There were a couple of missions in the past with one important mission in 2017 that was very similar. It is a 10 out of 10 tutorial which means we accomplish the cell phone mission every time.

10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.

This is a 10 out of 10 tutorial where we demonstrate a reproducible completion of a shared mission. The mission is shared as both teams must agree about how they are completing the mission. The tutorials shows the robot approaching the FIRST LEGO League mission model. You will see how the robot pushes on the lever every time for a 10 out of 10 completion.

This is a 10 out of 10 video recording about the FIRST LEGO League 2020 RePlay competition and the mission called Boccia Target. We are using LEGO Mindstroms Robot Inventor. The 10 out of 10 recording shows how reproducible the solution to the mission is. You will see a demonstration of a complex attachment that does 3-4 things at once - it alights, pushes, drops, which are all things that are commonly seen at FLL competitions.

This is a 10 out of 10 tutorial demonstrating the accuracy of an active gear attachment that accomplishes the Treadmill mission from the FIRST LEGO League 2020 RePlay competition. When the robot is well aligned to the line before that it is easy for the robot to accomplish the mission. You will see how we make use of the friction of the wheel to rotate the mission model.

10 out of 10 tutorials are about accomplishing missions in a reliable and repeatable way. In this video tutorials we accomplish the Step Counter mission 10 out of 10 times. We can push on the mission model, but if we push too hard we would lock it and there is no way back. So we use a slightly different approach. Check out the video to see how.

In this video tutorial we accomplish the Pull-Up bar mission from the FIRST LEGO League 2020. This is a 10 out of 10 tutorial for demonstrating the accuracy of the robot and the attachment. What you will learn is how a two part attachment works.

This is a 10 out of 10 tutorial demonstrating the accuracy of a Flip Attachment for the FIRST LEGO League 2020 Cell Phone Mission. The flip attachment flips a phone. Moves forward and flip it. This is a tricky business. It might not work. The trick is to approach the mission model from the right angle. In the tutorial you will see a demonstration and will learn how such a mission could be accomplished accurately with a LEGO Mindstorms Robot Inventor robot and attachment with gear wheels.

This 10 out of 10 tutorials demonstrates how we can accomplish a flip mission with a LEGO Mindstorms Robot inventor in a repeatable way. We manage to flip the tires on almost every try. You will learn and see how the attachment works and is able to push and flip the mission models.