How to express your ideas with a program language. Your instructions to the robot. Humans are also have programs - it is our DNA. The DNA of the robots are the programming instructions that we give.
The comunication between the motors and the controller should be configured in the RobotC software. Each motor could be connected on a different port and the goal of the video is to show you how.
Now that we know how to make the robot move forward let's see we can make it move backward.
In the RobotC software we could make the robot wait for a couple of seconds by using the wait function. This will give the motors a chance to work and this will actually move the robot.
In this episode we combine in a single program the previous two programs for moving forward and backward.
We are ready to build the first program for moving the robot forward and backward. We learn how to build simple programs for moving the program. But it is not that easy...downloading to the robot does not always result in the robot moving.
To prepare the robot to move in a square and to use a loop in the program we would first make this VEX EDR robot move forward and turn, using a program developed with RobotC.
Spinning with the VEX EDR robot involves the use of both motors. The left and the right. Every robot with wheels could spin and this makes not exceptions.
Where is the math while turning? Is there any math involved? Should there be?
The next important step when turning with a robot is to learn how to do an Arc turn.
We start with the previous program where we made the robot move forward and turn. We continue in this tutorial with repeating the same RobotC instructions four times. Our goal is to make the robot move in a square.
In this tutorial we would introduce you to the concept of loops using this VEX EDR Robot. As a final result we would have a program that makes the robot move in a square and not by repeating the same instructions for move and turn four different times.
The previous tutorial showed you how to copy/paste instructions in RobotC. The current video will introduce you to loops.
The more advanced task is to more in a polygon. This would require calculating the degree of each of the turns and RobotC is a language in which you could implement this math calculation very easily.
In this tutorial, we set the task of implementing another figure with the robot - a triangle.
