Building Instructions -

• FIRST LEGO League 2014-2015 World Class

Kiril Mitov's most favourite attachment. To quote him "I had a really great fun building this attachment and recording the videos for it".

It's an attachment with a Rubber band and a Flywheel and a Gear Wheel and a Worm Gear. So much knowledge in just one small attachment. The goal of the attachment is to be able to have an active attachment without actually having a motor. So you can place that attachment and it will do the work for you instead of using a motor to power it. 

Build with LEGO Mindstorms EV3 set. 

When placing the rubber bands check out the tutorials

Placing the white rubber band is shown at https://www.fllcasts.com/tutorials/105-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-2 at around 05:40.

Placing the red rubber band is shown at https://www.fllcasts.com/tutorials/104-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-1 

This LEGO attachment connects a LEGO Mindstorms EV3 Motor with a LEGO Technic Linear Actuator. The connection is through a couple of gears which makes the whole instructions quite interesting and useful as an example. 

The attachment was used during FIRST LEGO League 2014 Robotics competition.

These are building instructions for one of the greatest LEGO Mindstorms attachments that we've built. Super simple and easy to follow and at the end, you have an attachment with a rubber band that controls a lever and that could lift objects from the field. It could lift them up. Also because it is with a rubber band you don't need a motor and you could use the motor for other attachments. 

- you should attach it to the motor, depending on the orientation of the motor.

- you should attach it to the motor, depending on the orientation of the motor

Building instructions for the Rubber Band Attachment

- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.

- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;