Building instructions for the short arm
- you should attach it to the motor, depending on the orientation of the motor
- #116
- 12 Apr 2015
- 1
- you should attach it to the motor, depending on the orientation of the motor
- you should attach it to the motor, depending on the orientation of the motor.
This is the initial construction of a catapult. The base on which we will place the rest of the robot. The goal of this construction is to give the catapult the ability to rotate.
These are 3D Building Instructions for the Craft Creator mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This is the robot that we use to demonstrate a solution for the World Robot Olympiad 2021 Junior competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition.
We started with this robot and it has a few good ideas. It can collect two cars at the same time. We later decided to go for a more powerful robot. Check out WRO 2021 Junior: Slaimi - a post season WRO competition solution robot
3D building instructions for the Dinosaur toy mission model from the FLL 2022 competition. Find the parts in Bag 9 of the set
This reusable attachment could easily be placed on the side of a LEGO MINDSTORMS Robot Inventor robot and accomplish different missions that require the robot to interact with mission models. It uses gear wheels.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
This magical wardrobe is for little dolls wear and bags. It could be a part of every doll play at any time. Yes. We have daughters.
Do you like playing bowling? How about playing it with a Mindstorms 51515 Robot Inventor set? Well, these are the building instructions for the bowling pins and "playground". In order to play bowling with a robot, you'll first have to build one. This particular construction was created to be used with Tricky - the smallest Inventor robot - and its Kick the ball attachment. You could later spice things up and try to play it with the Turning attachment for Tricky.
You can find the LEGO set, with which this was built, by following this link.
You can find constructions created to play with Tricky, by following the links below:
Go, robot, grab the ball!
If you want to have some fun and play some ball grabbing with your Mindstorms Robot Inventor 51515 set, these are the building instructions you'll need. As you probably know, Tricky is the smallest robot made from this set. With this ball grabbing attachment, you could program Tricky to grab the Mindstorms/Duplo ball, which is included in the set, and place it wherever you want.
You can find the LEGO set, with which this was built, by following this link.
You can find other attachments for Tricky, by following the links below:
You can find constructions created to play with Tricky, by following the links below:
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment to accomplish Fll 2019 M10 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
Това е модул, направен да прилича на глава и щипки на богомолка. Щипките се движат с помощта на среден мотор, а главата има ултразвуков сензор за очи. Този модул се използва в Mantissa, a LEGO Mindstorms EV3 mantis robot.
Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.
Where do you keep your robots? We like to keep them ordered....
Actually we lied. It is almost always a mess wtih boxes and parts everywhere. We had sum FUN building this IKEA Billy and putting some of the FIRST LEGO League Mission Models.
Искаме учениците да могат да намират лесно частите и да прибират частите в указаните отделения.
Файловете се разпечатват от двете страни на хартия 160г формат А3.
Таблицата за подреждане е създадена да се събира в капака на кутията и тогава размера на гредата е 1:1. За да се събере в капака, трябва да се отрежат излишните части от картона по маркерите от предната страна на листа.
За да удължите живота на таблиците можете да ги ламинирате или с "ламинат мат" или с обикновен ламинат. Недостатъкът на обикновеният ламинат е, че има много отблясъци. Недостътъкът на "ламинат мат" е че трябва да се запечата с прозрачно лепило Ц200, за да не се отвори с времето.
Препоръчваме ви да разпечатате файла двустранно. Посоката на обръщане на листа може да бъде по късата страна, като книга. Ако желаете можете да настроите обръщането и по дългата страна. В печатницата, където ще разпечатвате ще ви помогнат с настройките.
Building instructions for a VEX IQ attachment for catching hex balls