This robot is robot based on Roberto Chassis. It is equiped with a pushing rack. You can add something to the rack so it can do some other jobs.
The program for this robot is at programs/ajk7i1-roberto-with-rack-for-pushing-to-the-left-and-right-side-vex-iq-robot.
In this spreadsheet, we have the values for the Integral part and the Gyro sensor for moving straight with the robot.
Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.
User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
Building instructions for this part of the BigDaddy competition robot
The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set
Сложното в този механизъм са краката на стоножката. По-долу имате инструкции за тях.
Останалата част от стоножката трябва да създадете сами по картинката по-долу.
Този робот трябва да се свали, за да се построи.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.
3D building instructions for the water reservoir mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 12
First version of a reusable gear attachment. By following the same principle for assembling the attachments you can change the direction of the gear wheels and build powerful attachments that could accomplish missions in any direction.
Second version of a reusable gear attachment. This time the black gear wheel is at the top. It is useful when you are constrained by space.
This is an pinless robot attachment designed for taking loops. It's built with LEGO MINDSTORMS Robot Inventor parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachments that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
