Building Instructions

Alternative to Bag 14 - Cargo Plane Alternative Model - FIRST LEGO League 2021-2022 CARGO CONNECT

These are 3D building instructions for an extensible and configurable attachment for FIRST LEGO League 2021 Cargo Connect and the Sorting Center mission. The attachment has 3 axles, and we can place these axles in all kinds of configurations.

These are 3D building instructions for an active pinless attachment from LEGO Education SPIKE Prime set. The attachment is used along with the Gazon robot to push mission models.

3D building instructions for the watch television LEGO mission model from the FLL 2022 competition

3D building instructions for the water reservoir mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 12

This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.

Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.

We use this attachment to discuss how an attachment and a module from LEGO Mindstorms Robot Inventor could be build in an easy to detach fashion. Check out the tutorial in the lesson for this attachment for more information about Detachable Modules

This is an Inertia triggered attachment build with a LEGO MINDSTORMS Robot Inventor 51515 set. With this attachment we can collect different parts and bring them back to base at FIRST LEGO League competitions. The principle is useful as no additional motors are required for activating this attachment. In the same time it is active which means that it moves and can change it's position in space separately from the robot.. which is useful

These are instructions on how to build the:

• Hinged container
• Container contents

You can find more building instructions and tips and tricks about the competition on this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Basketball mission. The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

We've deprecated it because we build a better attachment

This robot looks a bit weird. Can you guess why? The motors are placed in opposite directions. One of the motors is facing "forward" while the other one is facing "backwards". This means that if you tell both motors to rotate forward the robot will just rotate! To make the robot move forward, you will need to make one of the motors rotate forward and the other one - backwards.

The goal of this robot is to teach students that motors could be placed in many different ways. It is not always the case that the two motors face the same direction and this needs to be accounted for during programming.

Famulus means waiter in Latin.

One pumpkin spice latte coming right up! This robot is made to serve the best drinks in the whole continent! It is one of the simpler robots that can be made with the LEGO SPIKE Prime set and it uses two medium motors to move around. The coolest part about the robot is the cup holder where a "cup" can be attached or removed. Bottoms up!

This is the attachment to accomplish Fll 2019 M08 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.