LEGO Mindstorms Grabber v2
This is version 2 of the LEGO Mindstorms Grabber. It makes use of 4 gears to make both levers active.
- #422
- 01 Apr 2017
This is version 2 of the LEGO Mindstorms Grabber. It makes use of 4 gears to make both levers active.
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This module uses the rotation sensor in the medium motor to detect how much the players had turned its wheel.
This a the Dinore3x, the predecessor of the mighty Triceratops. This is one of the classic EV3 robots provided by LEGO.
An awesome ski-jet robot, steering with a medium motor and powered by a single large motor. It also has a pair of inclined treads, making it especially well-suited for the harsh winter terrain.
*There is a mistake in this robot you will have to find. How would you make it work?
Dwell is a car built with a LEGO MINDSTORMS EV3 set. It uses the medium motor for powering the back wheel and one more medium motor for rotating the front wheels and thus turning. Of course, there is a differential at the back.
Winter might be far away or it might just be coming - depending of course on where you are in the world. But you can always spend a few hours having fun with a LEGO Mindstorms Snowmobile. A really challenging construction that requires good preparation, concentration and a lot of efforts to complete. Same is going to the mountain in the winter. But the reward at the end is worth it.
Building instructions for a LEGO Mindstorms EV3 robot base. The attachment of the motors is quite interesting. We follow the angles of LEGO technic to attach them. This construction has some difficulties turning to the left and to the right. But if you have to take on an obstacle that high this is one of the options.
You can use all kinds of wheels on this robot - EV3, NXT or others. It doesn't actually matter.
For rovers in other worlds, getting stuck is definitely not okay! Teams of rovers can help each other, but a lone rover needs to be very careful.
(mission descriptions source: https://www.first-lego-league.org/)
This robot attachment could be used to throw objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate a principle and one example of an attachment for throwing. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This module uses the color sensor to detect the colors on its wheel.
Value was inspired by the spy vehicle robot. This little robot was built to measure the volume of the room he's in.
After the success of the original Gazon robot from LEGO Education SPIKE Prime, we've decided the build a similar robot, but from LEGO Mindstorms Robot Inventor 51515. Teams are participating in the FIRST LEGO League competition with a LEGO Mindstorms Robot Inventor set and we know it will be helpful. But this robot can not be build from a LEGO Mindstorms Robot Inventor 51515 as the set has only one Color sensor. We've build a version of the Gazon robot to address this specific limitation.
Some say it is cute, other say it is scary, but that's the way bunnies are. You never know if you are dealing with a cute little rabbit or a monster trying to destroy the universe as we know it.. you know, bunnies. This SPIKE bunny was designed by Ahmad Sahar and the building instructions were inspired by this video. and prepared by FLLCasts team as 3D building instructions.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.
The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program
Building instructions for the Pinless Rubber Band Attachment:
This is a distance sensor attachment for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. This attachment is place on the robot whenever we want to work with the LEGO Education SPIKE Prime Distance Sensor.