Find a plastic element. Cut it to 200mm by 140mm and attach this plastic plate to the front of our FIRST Technical Challenge Tetrix Robot.
- 20 May 2017
Building instructions with dimensions on the ball collecting mechanism for the FIRST Technical Challenge Push Bot. The collecting mechanism should be attached to the Chassis - https://www.fllcasts.com/materials/382-ftc-push-bot-chassis-from-tetrix
Here is a task for you. Find a plastic element, cut it to 200 mm x 140 mm and attach this plastic plate to the axle. At the end you should have the plastic plate rotating, fix it with at least 4 screws and 4 nuts. And the nuts are right here below
for you to see them.
Courses and lessons with this Tutorial
This Tutorial is used in the following courses and lessons