"I came to browse the Internet and build robots. And I am done browsing the Internet". Many different approaches, principles and directions to constructing robots with detailed building instructions and pictures.
Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions. Compared with previous versions of this robot, this one has a Gyro Sensor.
Here is another great example of a large multi-purpose attachment used in FIRST LEGO League competitions. This one is specifically for the 2017-2018 Hydrodynamics competitions and is doing a number of missions. (01) Pipe removal, (06) Water Treatment and (08) Manhole cover.
The attachment consists of two parts. The first part is placed on the robot while the second part is in front of the robot and the robot pushes it. While working on the field the robot leaves the second part on the Water Treatment plant and when returning back collects it back and returns to base.
The goal of the attachment is for you to build it and experiment with it with the existing field. Use Box Robot 2 as a robot base on which to add the attachments.
Probably the largest multi-purpose FLL attachment at FLLCasts. These attached is doing a number of missions at once. 4 of them. You attach it to the robot and start the program. The robot moves and accomplishes a number of missions using only this attachment. At it also has a lot of parts. It is quite large and you can not build it from a single set. But that's ok because you are preparing for a competition, right?
Two missions in one. This attachment accomplishes the Hydrodynamics Fountain and Faucet missions from the FIRST LEGO League Hydrodynamics 2017-2018 competitions. The attachment shows a really interesting and widely used approach of a single attachment that is used for two, three and even more missions. This is a standard practice for many of the advanced teams, especially those that reach the finals. The based of the robot is the LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro
These are building instructions for an attachment accomplishing the FIRST LEGO League 2017-2018 Slingshot mission. The based of the robot is LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro
We have to admit. This is quite an interesting missions. There is a Manhole cover and it must be turned upside down. Well, the robot must turn it. Again LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro is used as a base for the Robot.
Разполагахме с няколко минути преди да започнем да строим друг робот и ни хрумна идеята за този. Ако искате да построите Box робот, но нямате достатъчно части, това е една добра конструкция, с която може да се упражнявате. При нея има рамка и три мотора, като може да добавите и приставки.
Maze Runners are one of the very popular robotics competitions. But there are a lot of limits that the robots must comply with. Like the size of the robot.
This here are building instructions for a very small maze runner robot, build with LEGO Mindstorms EV3. It uses two tires that are technic and not Mindstorms simply because none of the Mindstorms tires fit the size limit.
The robot has an Ultrasonic sensor and a Gyro sensor at the top.
Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.
The attachment is constructed from LEGO Mindstorms EV3 sets.
Направихме този робот по ваше желание. При него има големи NXT колела. Големите ЛЕГО Mindstorms колела правят робота по-бърз, но бъдете внимателни, тъй като той вече не е толкова прецизен.
This modification of the box robot contains large wheels. It was specially requested by you and we have it .
Това е истински състезателен робот с три сензора за светлина и един сензор за ускорение.
Рамка за добавянето на приставки към робота. Когато използвате приставка, добавянето и свалянето на приставки без пинове става много бързо и лесно. Също така може да махнете и цялата рамка.
В рамката са използвани части от ЛЕГО Mindstorms EV3.
For the FIRST LEGO League 2016-2017 Animal Allies we prepared an attachment for lifting the robot. The idea of the attachment is to show how you could lift the whole robot with a system of gear wheels, levers, and scissors constructions.
Built mainly from LEGO Mindstorms EV3 parts but could probably be constructed from NXT sets.
Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.
Инструкции за построяването на състезателен робот на принципа на “Box” робота. Този робот е построен с ЛЕГО Mindstorms EV3 и може да се използва на състезания като FLL и WRO.
No need for all attachments to be powered by motors and to include gears. It's sometimes possible to use a simple robot attachment to collect objects. Such attachments we call passive and this one is an example for the Box Robot Chassis.
Build with LEGO Mindstorms EV3
A simple active attachment that could be added to the Box Robot Chassis.
When you need a LEGO robot attachment to lift heavy things on the competition field. Probably at FIRST LEGO League or World Robotics Olympiad. This attachment uses 4-5 gear wheels to lift a heavy object.
Build with LEGO Mindstorms EV3 parts.
Attachment frames are used on Base Robot Chassis to make it easier to add and remove attachments very fast. This frame is for the Box Robot 1. It is a single module build with LEGO Mindstorms EV3 parts and it could handle attachment on all sides.