„Box“ робот 3 с големи NXT колела
Направихме този робот по ваше желание. При него има големи NXT колела. Големите ЛЕГО Mindstorms колела правят робота по-бърз, но бъдете внимателни, тъй като той вече не е толкова прецизен.
- #341
- 28 Aug 2017
- 1
EV3 is a robotics sets from LEGO Mindstorms. With EV3 you could build an infinite number of robots like Vehicles, Animals and Tanks. The set comes in two parts - base set (45544) and a resource set (45560). EV3 robots are very popular at LEGO Mindstorms Robotics Competitions
Направихме този робот по ваше желание. При него има големи NXT колела. Големите ЛЕГО Mindstorms колела правят робота по-бърз, но бъдете внимателни, тъй като той вече не е толкова прецизен.
Attachment used to transfer the motion from the motor from a vertical axle to a horizontal axle. Uses two gear wheels. Could be built with LEGO Mindstorms EV3 and LEGO Mindstorms NXT kits.
This robot attachment shows you how to limit the rotation of a lever. It uses two gear wheels to transfer the motion on 90 degrees.
It could be built with LEGO Mindstorms EV3 and NXT versions. Most of the time during competitions like FIRST LEGO League and World Robotics Olympiad you need a lever for just a limited motion
Robot attachment that shows you how a circular motion could be transferred to linear by using a gear and a rack. The final motion is for pushing and pulling things.
The attachment could be built from LEGO Mindstorms EV3 and NXT parts.
The central axle of the robot is most of the time the most important. The robot moves forward and does things with this axle. It is important to learn to you could extend such axles, and change the level and position of the extensions.
This is a LEGO Mindstorms EV3/NXT robot attachment.
Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.
Инструкции за основа за робот от ЛЕГО Mindstorms EV3 с гуми 56mm, вариант 1. Тази основа може да се използва в състезания по роботика като FIRST LEGO League, World Robotics Olympiad и други.
Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult.
This robot construction itself was used in the FIRST LEGO League Senior Solutions competition
Building instruction for both EV3 and NXT. The whole catapult is build in exactly 78 steps.