Building Instructions

Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.

This robot is robot based on Roberto Chassis. It is equiped with a pushing rack. You can add something to the rack so it can do some other jobs.

The program for this robot is at programs/ajk7i1-roberto-with-rack-for-pushing-to-the-left-and-right-side-vex-iq-robot.

In this 3D scheme, you can see how the motor driver is connected to the Raspberry Pi and to the motor. Follow the steps in the instructions one by one and you will have successfully connected the motor to the Raspberry PI

A simple robot for classes, with Vex IQ Touch Sensor.

- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;

You can attach a frame around the front wheels to make them more stable and to allow for better aligning. The module extends the front wheel built at BigDaddy Front - front wheels mechanism module for a large LEGO Mindstorms Competition Robot

The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set

These are Alternative 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition to be used with the Chain Monster Box Robot. A single accurate rotation of the white arrow indicates a perfect mission completion.

This is the mat that's needed for level B2 from the SPIKE Prime curriculum. It features a sumo field with a curved outer line for line following. It also has 3 red and 3 green lines for tasks that need the robot to stop at first and third line.

The size is set in the pdf so you can print it as is.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.

The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot.It collects Izzy using a rubber band mechanism, solves the M13 Craft Creator with a hook and M12 Virtual Reality Artist using a gear that goes into the mission model.

This robot is made to serve as a cautionary tale for the line following robots with exposed to the ambient light sensors.

These are 3D Building Instructions for M04 Scuba Diver mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. This mission model does not have an alternative due to the specificity of the parts.

These are 3D Building Instructions for M10 Sonar Discovery mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Sonar Discovery for additional building possibilities.