Building Instructions

These are instructions on how to build the:

• Light Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.

3D scheme on how to connect the L298N Motor Driver to the Batteries. Follow the step-by-step instructions. Be careful about the PCB terminal connectors.

Step by step guide on how to add the SD card to the Raspberry pi. 

The Raspberry Pi must not be powered.  

3D scheme with instructions on how to connect the L298N driver to the batteries and to the motor. Just that. Connecting to the Raspberry Pi is at a later stage of the course. 

These are 3D building instructions on how to connect a diode directly to the batteries and turn it on. 

In Robopartans classes we needed a few parts the the robot could lift in a competition. These is a box that is suitable for this

Shows the pipe attachment constructions that is mounted on the robot. The pipe is than mounted on this constuctions

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and is used to complete Mission 05: Who Lived Here?, Mission 06: Forge, and Mission 07: Heavy Lifting in the FIRST LEGO League 2025-2026 UNEARTHED competition. The attachment positions the robot accurately in front of the mission models and interacts with each mechanism in sequence. In one run, it presses the Forge lever to release the stones, activates the Who Lived Here? model, and pushes a stone into the Right base. In a separate run, it pushes or captures the Millstone and transports it to the Right base.

This robot is designed to lift a cup smoothly while keeping it upright. With a motor attached to the side of the Hub, the robot can raise the cup to different angles.

With a few adjustments, you could even replace the LEGO cup and try lifting a real one. Just be careful with liquids - the robot doesn’t enjoy drinks as much as you do!

This example hook for the Nautiq robot is designed to attach other attachments to the wall during the FIRST LEGO League 2024‑2025 SUBMERGED competition. It is provided as a sample; the best hooks are custom-made to match the attachments they are intended to hold.

These are 3D Building Instructions for an Alternative M12 Feed the Whale mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M12 Feed the Whale.

These are 3D Building Instructions for an Alternative M06 Angler Fish mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M06 Angler Fish.

This construction is ment as a addition to the base line following robot with exposed sensor.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This is an alternative mission model for FIRST LEGO League 2022-2023 SUPERPOWERED Hybrid Car mission model. It is alternative as you only need LEGO Education SPIKE Prime parts to build it and you don't need the real parts from the real competition

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.