Video tutorials -

• LEGO MINDSTORMS EV3

Many times we just upload blocks and leave it up to you to use it. In this tutorial, I would like to show you how to use the implemented blocks. How to import them into the EV3-G software. How to see them in the palette. How to drag and drop them to build a working program. 

The challenge for this video is to program a menu that is controlled from the LEGO Mindstorms EV3 brick screen. 

After we take each sample, we perform calculations and these calculations could take different time. It is important to know how much time does it take to perform the calculations. In this video tutorial, we would data log the time and plot the data.

Let's implement a more advanced program for this robot to learn how to use with motors in opposite directions - and this is to implement the Proportional Line Following algorithm.

This video lesson shows a very interesting specific example on how to use the LEGO Mindstorms EV3 Ultrasonic Sensor. The sensor detects if the catapult is loaded or if we have just fired an element. At the end of the lesson I also offer an interesting challenge that you could use in your classroom or at home.

The robot works on the field and decodes the different colours that represent the rows and the columns.

After we have introduced a menu in the previous video, this video focuses on storing the values in an array. It presents a basic use of arrays.

If you get to a solution that is too complex you should always try to improve it. This is what we are doing here. Arriving at a solution for aligning to the wall that has become too complex.

We explore some common mistakes when a program is developed and becomes complex. We then try to remove part of this complexity. 

A human being walks with an average speed of about 5 km/h (3 miles/h). In this video tutorial we will develop a block for LEGO MINDSTORMS EV3, that measures the speed of the robot in distance/time units where time will be configurable and could be 1 second or 0.5 seconds or any other number of seconds you pass as a param to the block. Measuring the speed of the robot is very powerful if you start building an Artificial Inteligence for your robot and is quite fun :)

"Array initialization" is the first step in every program that involves Arrays. This applies to most programming languages and for EV3-G it is a must. 

In this tutorial, we would show you how to initialize the array and how to extract this logic in a new block

We would continue from the previous program where we used variables and we would change this to arrays.

We would look at the rules of the competition over our small model and we would start solving the field.

We are programming this strange construction to move in a square. This is a basic task, but it is worth doing for a robot with motors placed in different directions.

In the course section for Advance Sensor Calibration we previously showed you how to find the minimum and maximum value for a single LEGO Mindstorms Color Sensor and to store this value in an array. The program was implemented with the EV3-G software. In this tutorial we are going to find the Min and Max for all the four sensors and to store all the 8 values in an array.

Implement a program for stopping at a black line with the blocks containing the implementation details for the InitArray, Calibration and Getting the calibrated result. 

Once you start turning how to do you a whole 180 degrees turn. The robot almost does it, but not completely

Following the Advance Light/Color sensors calibration for a minimum value for a single sensor tutorial, in this one, we continue with finding the maximum value detected by a sensor and storing this value in an array.