Video tutorials
Filters:
Как да играем волейбол с LEGO Mindstorms EV3 роботи?
Представяме ви Минтонет. Роботът е създаден да се използва по двойки, но можете също така да изградите само един и да практикувате стрелбата си в кутия. Роботът работи с пластмасови топки с диаметър между 5 и 7 cm. С помощта на ултразвуковия сензор той може да открие или партньора си, или кутия и след това да стреля. Колко топки можете да вкарате вие?
- #1360
- 26 Jun 2019
Как работи Икнатир - Робот Самолетоносач от LEGO Mindstorms EV3?
Това е Икнатир - робот, който изстрелва хартиени самолети. Вземете лист хартия, сгънете го като хартиен самолет, поставете го върху Икнатир, натиснете лоста за изстрелване напред и самолетът ще полети във въздуха.
Ако не знаете как да сгънете хартиен самолет, ние сме насреща! Отворете материала Как да си направим хартиен самолет. Експериментирайте свободно с формата на самолета. Колко далеч достига вашият?
- #1358
- 25 Jun 2019


How does a Sweeper built with LEGO WeDo 2.0 work
Sweeper - a special vehicle designed for cleaning streets, pavements, and runways. The first sweeper is believed to be a construction patented on September 4, 1849 in the United States by CS Bishop, it was pulled by a horse cart. Until the end of the 19th century, 315 solutions for sweepers have been patented in the USA. The first sweeper with its own drive was patented in the USA in 1868.
- #1312
- 15 Jun 2019


Как завиват нашите ЛЕГО роботи?
Когато използваме конструкция, при която два двигателя задвижват двете страни на робота, лява и дясна, трябва да отбележим, че завивайки роботът винаги описва окръжност. В зависимост от начинът на завиване тази окръжност е с определена големина и център. Завоите представляват части от окръжността, която роботът ще опише.
- #1341
- 14 Jun 2019

Как да помогнем на ученика си като родител да влезе в първото си занятие
Вие като родител вече сте записали ученика си за занятия по роботика. Сега трябва да сме сигурни, че ученикът може да влиза в системата на FLLCasts.com и може да достигне до първия си урок. Ако сте забравили паролата си, по-долу ще ви помогнем да зададете нова.
- #1347
- 12 Jun 2019
How does the Ninja Motorcycle LEGO Mindstorms EV3 robot work?
This video tutorial shows how the LEGO Mindstorms EV3 Ninja Motorcycle robot works. It's a nice demonstration with the robot moving forward, backward, and slightly to the left and right.
- #1342
- 12 Jun 2019

How to setup a teacher profile
Every teacher in a group must have a picture and contact phone number. Here we help you set up these attributes.
- #1345
- 11 Jun 2019
How does the Turtle LEGO Mindstorms EV3 robot work?
Here is Turtle - a LEGO Mindstorms EV3 robot that is designed to look like a sea turtle (may look clumsy but it's not). It has two sensors - ultrasonic and gyro, capable of following its course and navigating through anything. It can even get "angry", if you annoy it too much.
- #1338
- 10 Jun 2019
How does the Comet LEGO Mindstorms EV3 robot work?
Here is Comet. It is a fast LEGO Mindstorms EV3 Car robot that looks like F1 Racing Car. We've especially designed it to be controlled with the remote control to make it extremelly easy to download the program and start playing with the robot. It also has the option to "press the pedal" (increase the speed) with just the remote control. Check it out.
- #1328
- 03 Jun 2019


FLL 2018: How to accomplish M14 (throw precisely) from FIRST LEGO League 2018 Into Orbit. Review
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M14. METEOROID DEFLECTION. The mission is a simple throw of a ball. But of course the ball should reach a specific mission model and arrive at a specific place. And that's always challenging.
- #1268
- 01 Jun 2019


FLL 2018: How to accomplish M05 (extract and collect) from FIRST LEGO League 2018 Into Orbit. Review
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M05. EXTRACTION. On every robotics competition we have the challenge to collect, carry and return to base a number of objects. It is just in different way every time.
- #1264
- 01 Jun 2019

How to manually enroll a brother or sister in a group - a user with same email, but different username
Parents generally use the same email address for their students. When enrolling into a group it is possible to enroll another user for the same email address. We call this a "brother or sister". Brothers and sisters could share the same email address but they have two different usernames.
The process of registering a brother or sister is the following
- #1322
- 30 May 2019


FLL 2018: How to accomplish M05 (collect) in Into Orbit. Review with Box Robot 1
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M05. EXTRACTION, but compared to one of the other tutorials about this mission, in this specific tutorial we are using Box Robot 1 and a multi-purpose attachment. The attachment is designed for two missions and one of the missions is the Extraction
- #1275
- 27 May 2019


FLL 2018: Mission run M05 (extract and collect) from FIRST LEGO League 2018 Into Orbit. Review
In this video tutorial we would look at the mission run for M05. EXTRACTION. The mission is to collect and return to base a number of objects that are located on the field. Initially when I first saw the mission I thought it wold be quite challenging to accomplish it, but at the end it is not that difficult.
- #1273
- 27 May 2019

FLL 2018: Mission run M09 (lift heavy) from FIRST LEGO League 2018 Into Orbit. Review
In this video tutorial we would look at the mission run for M09. STRENGTH EXERCISE. The mission is to lift a heavy object in the air. And that could a complex mission. It requires to use gear wheel and the attachment should be quite strong. The tutorial contains only the mission run on the field. We accomplish a single mission.
- #1272
- 27 May 2019

FLL 2018: Mission run M08 (aerobic push pull) from FIRST LEGO League 2018 Into Orbit. Review
The M08. AEROBIC EXERCISE is one of the very common types of mission in FIRST LEGO League robotics competitions. I think this pattern of missions was first introduced with the growing abilities of the participating students that were constantly reaching the maximum number of points. So the competition introduced mission that require a lot of time - 20-30 seconds, are time consuming and are complex. They requires a lot of moves. This here is a video tutorial on how it could be accomplished
- #1271
- 27 May 2019


FLL 2018: Mission run M06 (precisely push) from FIRST LEGO League 2018 Into Orbit. Review
In this video tutorial we would look at the mission run for M06. SPACE STATION MODULES. The missions is to precisely push a mission model into an opening. In almost any FIRST LEGO League competition there are such missions. The tutorial contains only the mission run on the field. We accomplish a single mission.
- #1270
- 27 May 2019

FLL 2018: How to accomplish M08 (aerobic push pull) from FIRST LEGO League 2018 Into Orbit. Review
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M08. AEROBIC EXERCISE. This again is a very interesting mission from the competition. We could learn a lot of basic principles in the field of robotics. This mission requires the robot do to something very fast and many times.
- #1266
- 27 May 2019

FLL 2018: How to accomplish M09 (lift heavy) from FIRST LEGO League 2018 Into Orbit. Review
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M09. STRENGTH EXERCISE. I could think for a couple of missions in previous years that require lifting a heavy object. Let's see how this mission could be accomplished.
- #1265
- 27 May 2019


FLL 2018: How to accomplish M06 (precisely push) from FIRST LEGO League 2018 Into Orbit. Review
This video tutorial contains a details explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M06. SPACE STATION MODULES. This again is a very interesting mission from the competition from which we could learn a lot of basic principles in the field of robotics.
- #1262
- 27 May 2019

How does the Lintu LEGO Mindstorms EV3 robot work?
Here is Lintu. It is a marvelous LEGO Mindstorms EV3 Animal robot that looks like Kiwi, the famous New Zealand bird. It is quite rare to see a Kiwi bird in person. But fear not, we've prepare a robot that looks almost exactly like the original.
- #1308
- 26 May 2019


FLL 2018: How to accomplish M13 (push) in Into Orbit. Review
In this video tutorial we would discuss the M13. OBSERVATORY mission from the FIRST LEGO League robotics competition 2018-2019 Into Orbit. This is an easy mission. You can accomplish it by pushing the level with the robot. The challenge is that there is not enough space to move with the robot around the attachment. Let's discuss how we could achieve it.
- #1276
- 26 May 2019


FLL 2018: Accomplish every time. M06. 9 out of 10 successful runs
This video tutorial is part of the series on how to make your robot 100% precise and accurate. We accomplish the M06. SPACE STATION MODULES mission 9 out of 10 times. The attachment works. Every time the attachment is started in successfully accomplishes the mission. It moves forward and attaches the space station module with the space station.
- #1281
- 25 May 2019


Parking. Mission 05 of FLLCasts Off-season Challenge 2019
Mission
The robot should park in the parking positioned in the north-east corner of the field.
Scores
At the end of the match the robot is completely in the parking area in the north-east corner of the field: 50 points.
- #1295
- 22 May 2019


FLL 2018: How to accomplish M04 (crossing an object) from FIRST LEGO League 2018 Into Orbit. Review
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M04. CRATER CROSSING. These are some of the funniest missions at this robotics competition. Try to move over an obstacle with a robot and if you manage to return back to base without bumping into other mission models that would be great.
- #1267
- 20 May 2019