Building Instructions -

• Attachments - pinless

-

• LEGO MINDSTORMS EV3

This is a frame for the SUV Box Robot. Tis frame is an adapter between the robot and the attachments. You can add-in several attachments on it and mount them on the robot simultaneously with one movement.

The frame has two locks that make the attachments stick to the robot. Also the front Knobs must not be used for very powerful activities due to jumpings, unless the frame with attachments become heavy enough to prevent any jumping of the frame.

In this attachment two knob wheels "(32072 ) Technic Gear 4 Knob" engage at 90 degrees angle. One of the knob wheels is a part of the robot and the other is a part of a pinless active attachment. The purpose of this attachment is to demonstrate How NOT to build attachments. 

Build the attachment and experiment. See for yourself how it "jumps" up and down when the knob wheels are rotating and you hold the lever by hand. 

This is a simple pinless active attachment for the SUV Box Robot.

In this attachment we use "(32498) Technic Gear 36 Tooth Double Bevel". There are four pins added to the wheel and it it this pins that engage with the "(32072 ) Technic Gear 4 Knob". The more important thing is that the knob wheel and the gear wheel are parallel to each other.

While the motor rotates the attachment has 4 points of contact (instead of one or two when two Knob Wheels are in contact) with the robot knob wheel. There are no forces that drive the attachment to jump and lose engagement with the robot.

Instructions for building the quick attachments for this LEGO robot

The attachment shows how to do build a pinless robot attachment with LEGO EV3 Mindstorms.

Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.

SIngle robot attachment, many points. 

Probably the simples trick for pinless attachments that we've found. It is a construction build in just three steps. Simple as that. But it has a lot of potential to teach you how to use pinless attachments. Pinless attachments are very useful during FIRST LEGO League and World Robot Olympiad competitions. 

Another example for a quick pinless attachment build with LEGO Mindstorms EV3 robots.

This attachment accomplishes the Into Orbit Extraction mission from the FIRST LEGO League Into Orbit 2017-2018 competitions. The based of the robot is the SUV Competition Box Robot from LEGO Mindstorms EV3.

The program for this attachment is at https://www.fllcasts.com/programs/2hpdg9-fll-2018-attachment-to-accomplish-the-into-orbit-extraction-05-robot-game-missions-program.

This is a self aligning passive attachment for rendezvous and meeting between the tube module and the habitation hub.

The program for this attachment is Self Aligning Module Attacher for M06 - Space Station Modules.

There is another program at Self Aligning Module Attacher for M06 - Space Station Modules - another program.