Constructions that have 3D Live Interactive animations.
During a competition a team of students had to build a robot that looks like a musician. This construction in front of the robot is a Trompet and it looks like Ane is playing some music. If you play music on the phone on the side it is really funny to watch it play.
Meet Kiddo, smaller sister of Roller Coaster. It is smaller, easier to build and easier to control box robot with X-Y moving plate.
The goal of this robot is to have one complex attachment that could move in four directions. With such an attachment you can solve a lot of complex tasks without loosing time changing attachments. It is also quite sturdy and packed
Here is an idea. What if a robot does not need attachments. What if there is one special attachment on the front that could do most of the work? Probably an attachment that allows you to move a lever in any direction.
This here is a Box Robot with X - Y axys plane. This robot doesn't need active attachments because it has X - Y table that do the job. Imagine that there is a plane on the front of the robot. With the rack mechanism you can move to any coordinates on this plane.
We have a lot of ideas how to make it even better. We will try to release them in the next few versions.
Instructions for building a LEGO truck. We use a medium motor for steering and a large motor for driving one of the rear wheels.
This drag car is a two-motor version of the Drag car robot. With more motors comes greater power!
Francesco 2 is inspired by the robot Francesco.
Building instructions for a simple car using an EV3 Large motor for turning the front wheels and EV3 medium motor with differential for driving the rear wheels. Differently, from Francesco, Francesco 2 has space where a locking mechanism is meant to be built for the differential.
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
Building instruction for the power switch mission model. The model is used in the Power supply mission of FLLCasts Off-season Challenge 2019.
Sebastian is a six-legged creature, which technically makes it not-a-crab. Anyway, it still walks sideways and is amazing to build and watch.
You can find the program for Sebastian here.
This robot is a spin-off of the Useless machine built from LEGO Mindstorms EV3. This robots mission is to be the last to press the button it holds.
This is a vehicle that is used to help you to learn programming, to experiment with addons, attachments and constructions. It has a frame. Which is nice. A frame is always nice.
It has two wheels at the back, but this is needed only if you have them.
Cápa means shark in Hungarian.
The robot resembles a live hammershark. It uses a medium motor to move its tail, which is used for the shark to turn. It moves forward with a large motor and two tyres. Its jaws open and close with a second large motor. The two touch sensors at the front are purely for aesthetics but you can use them if you like. Finally the head has an ultrasonic sensor which detects if something is a potential "prey". This resembles the real hammer sharks' ability to sense with their "hammer".
Geldautomaat, from German, means ATM.
This is the last robot from the 3.0 course book in the LEGO Mindstorms Curriculum. It uses a Touch Sensor to sense if there is a card inside. When touched, a Medium Motor starts spinning and pulls the card inside its chamber, where a Color Sensor reads the data from the card.
NOTE: There is a step, where you have to place the "credit card" inside. It may seem unnecessary and pointless, but otherwise, you will not have proper support for the next steps and the construction will crumble.
Antares is the brightest star in the Scorpius constellation.
The robot's main purpose is to show two different grabbing mechanisms - one vertical and one horizontal. The vertical pincers use a medium motor and the horizontal pincers use a large motor. Additionally the robot has a sting mechanism which uses another large motor. For a head it uses an EV3 ultrasonic sensor. With the sensor, the robot can sense when the prey is close enough for a suprise attack.
A fearsome and dangerous robot. It will find a place to hide and patiently wait in ambush.
NB! This robot requres bluetooth connectivity, as its USB port is blocked in the construction.
An awesome ski-jet robot, steering with a medium motor and powered by a single large motor. It also has a pair of inclined treads, making it especially well-suited for the harsh winter terrain.
*There is a mistake in this robot you will have to find. How would you make it work?
Building instructions for the Formula 1 Racing Car, built with LEGO Mindstorms EV3. It can turn with the help of a small motor and is driven by two large ones.
An example program for using this robot could be found at: https://www.fllcasts.com/programs/692hkz-comet-program
