Building Instructions

- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.

- you should attach it to the motor, depending on the orientation of the motor.

This construction uses a differential. Both wheels could turn with different speed and this makes a construction much more stable when turning. 

This is the attachment to accomplish Fll 2019 M10 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

This is a steering mechanism made to look like a fish tail, so that you can make the coolest fish robot that steers like a fish. It uses a medium motor to move left and right. You can combine it with other modules to make your sea creature robot with a tail!

This is a movement module, that works like real boat paddles! It consists of two paddles, each connected to a large EV3 motor. The module can be connected with other modules to make a robot that moves like a boat!

Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.

Instructions for building module 4 version 1 of the Ugbroid - rear wheels.

- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;

You can attach a frame around the front wheels to make them more stable and to allow for better aligning. The module extends the front wheel built at BigDaddy Front - front wheels mechanism module for a large LEGO Mindstorms Competition Robot

The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set

This is the attachment to accomplish Fll 2019 M08 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.

The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program

Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.

This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge

The run with this attachment is very inconsistent and fails very often.

Remilo comes from esperanto and means paddle.

The robot resembles a boat, but moves on land. It uses two large motors with "paddles" attached to them to move. Because its movement capabilities are limited, it has a gyro sensor to correctly move forward.