Motorka - LEGO SPIKE Prime motorbike robot
- #1066
- 11 Aug 2020
As you might have seen, recently all the cool kids build tensegrity structures. So we decided to make one for those of you who have a Spike prime set and want to build one themselves! In addition this tensegrity structure requires only parts from the set, which means you don't need to tie any strings on beams or other parts!
At the top of the structure we have two fully functional motors! Can you make something cool with them?
Tohuru, from Maori, means owl.
Tohuru is a SPIKE Prime robot, that holds onto an edge and looks at the nearest object! It uses two medium motors to grip an edge between two wheels. In addition it has a head made out of an ultrasonic sensor, attached to a large motor, which allows it to turn 360 degrees! And most importantly, it looks like an Owl!
Big Wheelster, as his name suggests, is a robot with a big wheel! The Big Wheel is made out of the SPIKE Prime Baseplates. The robot also has an interesting steering mechanism! At the front we have added a touch sensor, to detect an obstacle and hopefully avoid it.
Larvy is a SPIKE Prime robot, that moves like a larva or caterpillar. The robot has a Large motor, that contracts and expands it! Using the two medium motors, it turns 4 tyres to their side and upright whenever it wants, so that it can move forward!
A program for the robot can be found here: Program for Larvy - LEGO SPIKE Prime robot
Meet Kiddo, smaller sister of Roller Coaster. It is smaller, easier to build and easier to control box robot with X-Y moving plate.
The goal of this robot is to have one complex attachment that could move in four directions. With such an attachment you can solve a lot of complex tasks without loosing time changing attachments. It is also quite sturdy and packed
Here is an idea. What if a robot does not need attachments. What if there is one special attachment on the front that could do most of the work? Probably an attachment that allows you to move a lever in any direction.
This here is a Box Robot with X - Y axys plane. This robot doesn't need active attachments because it has X - Y table that do the job. Imagine that there is a plane on the front of the robot. With the rack mechanism you can move to any coordinates on this plane.
We have a lot of ideas how to make it even better. We will try to release them in the next few versions.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
Instructions for building a LEGO truck. We use a medium motor for steering and a large motor for driving one of the rear wheels.
This drag car is a two-motor version of the Drag car robot. With more motors comes greater power!
This robot was designed for the VEX IQ Challenge 2019-2020. It could push four hubs simultaneously. It can carry one. And it call pull itself on the bar at the end of the run. We've used four omni wheels of which the two at the back are the driving wheels.
Demo program can be found at Program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.
Francesco 2 is inspired by the robot Francesco.
Building instructions for a simple car using an EV3 Large motor for turning the front wheels and EV3 medium motor with differential for driving the rear wheels. Differently, from Francesco, Francesco 2 has space where a locking mechanism is meant to be built for the differential.
These are building instructions for a 4x4 LEGO WeDo 2.0 vehicle
These are building instructions for a LEGO WeDo 2.0 Sweeper.
These are building instructions for a LEGO WeDo 2.0 Small Creatuer
These are building instructions for the Lauchner, built with LEGO WeDo 2.0
These are building instructions for LEGO WeDo 2.0 Forklift.
These are building instructions for Overload Centrifuge training machine built with LEGO WeDo 2.0