Building Instructions
Filters:
Glide attachment frame for Chain Monster
The Chain Monster is one of the coolest Box Robots that we've built. But what is a robot without attachments that can accomplish missions? These here are 3D building instructions demonstrating how the frame for the robot could be built. We've discussed frames in the Box Robots courses for EV3. Take a look at this one. See if it can inspire you to build robots and attachments in certain way to achieve consistent and reliable robot behavior.
- #1666
- 09 Aug 2023
Top attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This is an attachment for the top of the robot and the attachment is used for lifting different parts. It is reusable as we could change the lever and use the attachment for a number of different missions.
- #1455
- 29 Apr 2022
FLL 2020: Attachment for Bench mission
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Bench mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
- #1323
- 28 Jun 2021
Building instructions for the short arm
- you should attach it to the motor, depending on the orientation of the motor
- #116
- 12 Apr 2015
- 1
Building instructions for the long arm
- you should attach it to the motor, depending on the orientation of the motor.
- #117
- 12 Apr 2015
- 1
Side attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This reusable attachment could easily be placed on the side of a LEGO MINDSTORMS Robot Inventor robot and accomplish different missions that require the robot to interact with mission models. It uses gear wheels.
- #1456
- 29 Apr 2022
Push-Pull attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.
- #1506
- 12 Apr 2022
FLL 2020: Attachment for Tire Flip mission
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
- #1320
- 26 Jun 2021
WRO Robot LEGO Base for container attachment
LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.
- #167
- 12 Dec 2015
- 1
Building instructions for the base of the attachments
- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.
- #115
- 12 Apr 2015
- 1
FLL 2022: Push and collect front attachment for Kriket Box Robot
This attachment is part of a second versions of attachments for accomplishing the M07, M08 and M15 where we have to push and collect in the FIRST LEGO League 2022-2023 competition. It is for the Kriket Box Robot and we are doing this second versions to make sure there are enough examples of how to use the Kriket box robots
- #1691
- 24 Oct 2023
FLL 2021: Cargo Connect M15 Load Cargo attachment
This is an active attachment with gears built from LEGO Education SPIKE Prime robotics set. The goal is to do a precise drop. The attachment could be used for both cargo items.
- #1522
- 18 Apr 2023
WRO 2021 Junior: A post season WRO competition solution robot
This is the robot that we use to demonstrate a solution for the World Robot Olympiad 2021 Junior competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition.
We started with this robot and it has a few good ideas. It can collect two cars at the same time. We later decided to go for a more powerful robot. Check out WRO 2021 Junior: Slaimi - a post season WRO competition solution robot
- #1598
- 18 Jan 2023
FLL 2021: Cargo Connect M01 Innovation Project Model attachment
An attachment for accomplishing the Cargo Connect M01 innovation project model mission. It is used to guide the mission model.>
- #1518
- 18 Oct 2022
Drop attachment with LEGO MINDSTORMS Robot Inventor, with buidling instructions
This attachment demonstrates the principle of dropping a part inside a container. It uses parts only from the LEGO MINDSTORMS Robot Inventor 51515 set. The goal of the attachment is to release a lever that is holding the wheel.
- #1490
- 29 Apr 2022
Pinless attachment from LEGO MINDSTORMS Robot Inventor, with building instructions
This is an attachment positioned below the robot and used for when we need to push something with the robot. It keeps the cargo in place while pushing. In this way we can achieve a consistent behavior with the robot, which is what we all want
- #1491
- 24 Mar 2022