Building Instructions

This module is made to look and move like a real ship's sails! The module consists of two masts that are connected so that they move together. The back mast is connected to a medium motor that can move all sails and is also connected to a gyro sensor, that can detect if the whole ship is rotated. This module is used in Yolanda - LEGO Mindstorms EV3 Sailship robot.

This module is made to look like a head of a ram made with LEGO Mindstorms EV3. It uses an ultrasonic sensor, which points down as if it is going to attack, as the eyes of the head. It can be combined with other modules to create the perfect ram robot!

This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.

The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program

Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.

This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge

The run with this attachment is very inconsistent and fails very often.

In this spreadsheet, we have the values for the Integral part and the Gyro sensor for moving straight with the robot.

Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.

The building guide for the FIRST Technical Challenge Push Bot build with the Tetrix set

User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.

The construction is built with LEGO Mindstorms EV3

Building instructions for this part of the BigDaddy competition robot

Building instructions for the gear attachment. 

Instructions for building the five minutebot used in the tutorial.

Paga is named after the famous violinist Niccolò Paganini.

The robot is designed to resemble a violin. The faster the motor turns, the higher the pitch it produces. Let’s see if you can play a concerto on it!

This attachment for the Nautiq robot is designed to accomplish M12 Feed the Whale in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It demonstrates how to use mission models as part of a passive mechanical trigger and how to apply carabiner mechanisms for purposes other than locking.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This robot is made to serve as a cautionary tale for the line following robots with exposed to the ambient light sensors.