Stripping the M-M of M-F cables to prepare them for extension Pro Preview

In the set, we have M-M, M-F and F-F. It is important that we use M-M or M-F when stripping because we would need the M end to place it in the driver.

To access the full video please subscribe to FLLCasts.com

Subscribe

  • #748
  • 23 Feb 2018

TL. DR.

The "M" end of the cable is placed in the driver in the next step. Use a M-M and strip the M-M or use the M-F and strip the F

Why do we need the "M" end of the cable?

At the next stage of the course, we would have to connect the cables to the driver. The appropriate and convenient way to do this is to use the "M" end of the cable. See picture below how the "M" ends are placed in the driver

This means that we cannot use an "F-F" cable because there is no "M" end of this cable.

Cut the end and strip?

Cut it with scissors or knife. Stip with the lighter.

Courses and lessons with this Tutorial

This Tutorial is used in the following courses and lessons

Image for Perfect STEM course. Module 1 - Smart Car with Raspberry PI
  • 118
  • 42:47
  • 136
Image for Stripping set cables to prepare them for extending car cables
  • 3
  • 0
  • 2
  • 3d_rotation 0