This video tutorial is about flipping tires. We are using a LEGO Mindstorms Robot Inventor and the missing is from FIRST LEGO League 2020-2021 competition called RePlay. In the video you will see how to approach the two tires and how to flip them with an attachment. Then they must be returned back to the black circle.
Accuracy and consistency is the topic of this tutorial, as all 10 out of 10 tutorials are at FLLCasts. We use a robot build only from LEGO Mindstorms Robot Inventor parts and we accomplish the mission 10 out of 10 times. You will see how we use an active gear attachment to catch the wheel and pull it to the black circle, which accomplishes the mission
This video tutorial demonstrated the use of an active gear attachment for catching a wheel and pulling it. This is how we accomplish the Rowing Mission from the FIRST LEGO League 2021 competition. What you will learn is how such an attachment works. How you transfer power from the top of the robot where the motors are to the bottom of the robot where the catching mechanism is. Check out the building instructions for the attachment.
In this video tutorial we dance with the robot. The goal of the mission is to reach the specific place on the FIRST LEGO League field and to Dance. It is suitable for students that are new and it gives every team a chance to accomplish at least on mission on the competition.
The bench mission was a video tutorial that we recorded several times. It was really hard to get it 10 out of 10. The reason was the shear complexity of the mission. There are three things that should happen in this mission at once which was extremely difficult. What you will see in the tutorial is how this attachment behaves
The bench mission was one of the most difficult we've encountered, especially when it comes to accomplishing the mission reliably. The goal of the mission is to push the bench down, lift part of it and leave 4 boxes at specific places. The whole concept of the mission is awesome. Here is how we did it:
10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.
The Slide mission the FIRST LEGO League 2020 is about the LEGO Minifigures sliding down the slide and the robot bringing them back to base. We must somehow bring then back do base. Do we push them on the Slide? Do we pull them? Or we could lift them. In this video tutorial we decided to pull the minifigures, but there is a catch.
This is a 10 out of 10 tutorial demonstrating the accuracy of a Flip Attachment for the FIRST LEGO League 2020 Cell Phone Mission. The flip attachment flips a phone. Moves forward and flip it. This is a tricky business. It might not work. The trick is to approach the mission model from the right angle. In the tutorial you will see a demonstration and will learn how such a mission could be accomplished accurately with a LEGO Mindstorms Robot Inventor robot and attachment with gear wheels.
10 out of 10 tutorials are about accomplishing missions in a reliable and repeatable way. In this video tutorials we accomplish the Step Counter mission 10 out of 10 times. We can push on the mission model, but if we push too hard we would lock it and there is no way back. So we use a slightly different approach. Check out the video to see how.
In this FLL video tutorial we accomplish the step counter mission. We use a LEGO Mindstorms Robot Inventor robot. The idea of the mission is to control the robot in a very precise way so that it could slowly push on the mission model and accomplish it. In the tutorial we demonstrated exactly this slow push, but in a different way.
In this video tutorial we accomplish the Pull-Up bar mission from the FIRST LEGO League 2020. This is a 10 out of 10 tutorial for demonstrating the accuracy of the robot and the attachment. What you will learn is how a two part attachment works.
The goal of the Pull-Up bar mission is to have the robot pull up on the bar... ok.. wording. In this video tutorial we demonstrate an interesting attachment that helps the robot attach to the Pull-Up bar and hang there. How do we do this - with a platform, that brings the robot to the bar and then detaches itself from the robot
Similar to the tutorial for the LEGO Education SPIKE Prime this tutorial again accomplishes the cell phone mission. The mission is to flip the phone and is part of the FIRST LEGO League 2020 RePlay competition.
This is a 10 out of 10 tutorial where we demonstrate a reproducible completion of a shared mission. The mission is shared as both teams must agree about how they are completing the mission. The tutorials shows the robot approaching the FIRST LEGO League mission model. You will see how the robot pushes on the lever every time for a 10 out of 10 completion.
This FRIST LEGO League video tutorial is about he Boccia Share mission from FIRST LEGO League 2020 RePlay competition. In the tutorial we demonstrate how to push on a lever to release a mission model part - in this case a box. You have the choice before the competition to cooperate with the other team and to decide if you are going to do the blue or the red box.
This is a 10 out of 10 video recording about the FIRST LEGO League 2020 RePlay competition and the mission called Boccia Target. We are using LEGO Mindstroms Robot Inventor. The 10 out of 10 recording shows how reproducible the solution to the mission is. You will see a demonstration of a complex attachment that does 3-4 things at once - it alights, pushes, drops, which are all things that are commonly seen at FLL competitions.
In this video tutorial we accomplish the Boccia mission from the FIRST LEGO League 2020 RePlay competition. We use LEGO Mindstorms Robot Inventor robot. In this mission we use an attachment that does three things in the same time - align, push one lever and drop a couple of boxes in a target. It is a complex attachment and it is worth the watch.
In this video tutorial we accomplish the Cell Phone mission from the FIRST LEGO League robotics competition, season 2020-2021. The goal of the mission is to flip a phone. There were a couple of missions in the past with one important mission in 2017 that was very similar. It is a 10 out of 10 tutorial which means we accomplish the cell phone mission every time.
In this video tutorial we accomplish a robotics competition mission model and we accomplish it 10 out of 10 times. The mission is Pull-up from the FIRST LEGO League 2020 RePLAY competition. The goal of the mission is to pull up the robot on the bar. The robot must not be touching the ground.
In this FIRST LEGO League video tutorial we accomplish the Step Counter mission from the FLL 2020 RePlay mission. The mission model is quite interesting as it can not be pushed fast and it can not be pushed slowly, because it will jam. The robot must push it with the right speed and this proves to be difficult.
The Cell Phone mission is part of the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to flip the Cell Phone. In this video tutorial we use a LEGO Education SPIKE Prime robot to flip the cell phone. This mission is similar to the FLL 2017: How to accomplish Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018.
In this video tutorial we accomplish the Basketball mission 10 out of 10 times. We use one of the more complex attachments for the FIRST LEGO League 2020 RePlay competition. You will see an learn how to successfully and consistently complete a mission that requires the robot to put a ball into a basket and lift the basket, or lift the basket and put the ball into it.
In this video tutorial we accomplish the basketball mission from the FIRST LEGO League 2020 reply competition. We use the LEGO Education SPIKE Prime competition robot called Gazon. You will learn the principles of accomplishing a mission of two parts - put the ball in the basket and lift the basket.
This is a 10 out of 10 video tutorial for the Slide mission at the FIRST LEGO League 2020 RePlay LEGO robotics competition. In the tutorial we demonstrate how to accomplish the mission 10 out of 10 times. At FLLCasts we try to build the attachments to be as consistent in their behavior as possible possible. In this way you know how the attachment along with the LEGO Education SPIKE Prime or LEGO Mindstorms robot will behave.
This robotics video tutorial is about the FIRST LEGO League 2020 RePlay competition and how we accomplish the Slide mission with a LEGO Education SPIKE Prime robot. The goal of the Slide mission is to collect two LEGO Mini figures and bring them back to base. We are demonstrating a simple attachment that collects 2 figures placed in an add way. The whole attachment must bring one of the figures up and then back.
Step Counter mission model is one of the more interesting mission models at the FIRST LEGO League 2020 RePlay competition. There is a locking mechanism that does not allow us to just push on the mission model to accomplish it, you must push it really slow and to do this 10 out of 10 times it is challenging.