Building Instructions -

• Attachments

A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.  

Building instructions for the LEGO Mindstorms attachment using Rubber Bands

The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.

This is the attachment of Team "Nightbeast", with which they :
1. Eject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer.
2. Crater Crossing
3. Tries to score a meteoroid( tries to shoot a ball)
From missions M03,M04 and M014 from FLL Into Orbit Challange

This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition. 

Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult. 

This robot construction itself was used in the FIRST LEGO League Senior Solutions competition

This is the attachment of Team "Nightbeast", with which they do:
M11–Escape Velocity and M13–Observatory
The Observatory result depends on the model. Sometimes the pointer is in the orange area otherwise in the white area.

If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.

Built from LEGO Mindstorms EV3 parts. 

This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side 
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
 

Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions. 

- you should attach it to the motor, depending on the orientation of the motor

- you should attach it to the motor, depending on the orientation of the motor.

LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.

- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.