Power switch mission model. FLLCasts Off-season Challenge 2019
Building instruction for the power switch mission model. The model is used in the Power supply mission of FLLCasts Off-season Challenge 2019.
- #780
- 22 May 2019
Building instruction for the power switch mission model. The model is used in the Power supply mission of FLLCasts Off-season Challenge 2019.
This is a disk image containing a Raspbian OS. The image is modified and set up specifically for the Perfect course. It contains all the needed files, libraries and additional tools that we would use in the course. The file is quite large so be prepared to wait some time while downloading.
Checksum: 4d85292f49a9350fcef9f2eb8fd86b77f1c6bd65ce1344848de3e201c9e1d20d
This is a Material supplementing the Instructors training course. Attached is our methodology for working with students. If you spend some time to read it beforehand, we can discuss only the questions that you have, instead of listening to the whole thing. That will be a more efficient usage of our time in the training.
This is a print ready vinyl mat that contains 7 barcodes and 15 products. The barcodes are not symmetrical and can yield different product result depending from the scanning direction - left to right or right to left. This mat is used in lesson 6 of level 3.5 Measurement tools.
This is the field used in FLLCasts Off-season Challenge 2019. The pdf should be downloaded and printed 1:1. It is best if it is printed on durable canvas such as vinyl. Although we do not recomend it, the field can be printed on regular paper.
Building instructions with dimensions on the ball collecting mechanism for the FIRST Technical Challenge Push Bot. The collecting mechanism should be attached to the Chassis - https://www.fllcasts.com/materials/382-ftc-push-bot-chassis-from-tetrix
It's the second version of the Robot Base 4, but with rotated inside motor.
Building instructions for the second module of the Ugbroid robot - the Base.
The data log from the experiment when moving forward and keeping straight with an implementation for Proportional compensation.
Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.
Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
It's the third version of the VEX IQ Easy Bot with rotated Robot Brain and castor wheel.
Building instructions for Module 1 of the Modular EV3 LEGO Mindstorms vehicle - the Trunk.
The goal of this robot is to teach students how to build modular robots. This first part is just one of the modules.
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
In this 3D scheme, you can see how the motor driver is connected to the Raspberry Pi and to the motor. Follow the steps in the instructions one by one and you will have successfully connected the motor to the Raspberry PI
It's the second version of VEX IQ Easy Bot. It's simple as the first one, but the motors are rotated.
Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.