Building instructions for a LEGO Mindstorms EV3 robot base. The attachment of the motors is quite interesting. We follow the angles of LEGO technic to attach them. This construction has some difficulties turning to the left and to the right. But if you have to take on an obstacle that high this is one of the options.
You can use all kinds of wheels on this robot - EV3, NXT or others. It doesn't actually matter.
Let's build a robot with treads. These building instructions are for a Guard Tank Robot. The good thing about tanks is that they could tackle a lot of obstacles on their way. At least this is what people are saying. Try it. Could you move over LEGO parts with this tank if they are one brick tall, or two bricks tall? What would be the largest obstacle that you could find, over which this tank could still move? Share a video or picture below in the comments section.
We would admit that this tank lacks a gun or an arm, but it is up to you to build one.
Building instructions for a LEGO Mindstorms EV3 robot where the motors are placed in an unusual manner. They are vertically placed on the sides. This robot construction base is very convenient for a quick and interesting robot on which you could build.
There are so many ways to attach the motor to a Mindstorms Brick. We haven't counted them, but we sure like to experiment with them. This is one way. Not the perfect, not very stable sometimes, but you could also learn from prototypes and "mistakes". And the LEGO brick is on the same level as the motors. Follow the building constructions and have the motors attached to the sides of this Mindstorms Base construction.
The third version of the EV3 Easy Bot. This is a simple and easy to follow robot, that aims at showing the use of tyres on robots. The robot has a gear up ratio and no tyres, so it is quite fast and entertaining.
LEGO Mindstorms EV3 Robot designed for a Folk Race competition. This robot has three Ultrasonic Sensors. Follow the building instructions and at the end, you would have a very basic robot with tank treads that you could directly use.
The goal of these building instructions is to build a LEGO Mindstorms EV3 robot without wheels. You should then decide on your own how exactly to add the wheel. Which wheels would you use at the front? How are you going to build the third wheel? Here are some recommendations on building the third wheel - 1,2,3,4
Building instructions for a LEGO Mindstorms Robot that cleans the landing site when landing on a different planet. Built from an EV3 set it is a perfect simple tank robot with continuous tracks for lifting and moving things. Basically cleaning.
Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.
The attachment is constructed from LEGO Mindstorms EV3 sets.
This is a simple robot, variation of the Earl bot using treads. You can use the attachment to kick balls sideways. The robot is useful in STEM classes where students have to construct robots quickly.
This is the simplest possible line following robot. It has just one sensor in the front between the two driving wheels and uses beams as pivots instead of a third wheel. Try it out. Follow the building instructions and start following lines in a number of minutes.
This is an example of a robot for Sumo Robotics competitions. Specifically for RoboteX challenge. As most of the Sumo competitions have specific requirements for the robot size this one follows the 15cm x 15cm requirements.
Sumo competitions could be quite fun and interesting as the goal is to push the other robot outside of the ring.
The first thing every student wants to build is a LEGO Mindstorms EV3 robot with treads. Well, we have one. Take a look. It's really funny.
Can you make it move? Send us a video or picture in the comment section below.
Don't we all love animals? But it is sometimes difficult to have a puppy at home. Presenting to you - the Puppy robot (drums in the back). It has some of the benefits of a Puppy - it is small, it can follow you with the Ultrasonic Sensor and it can bark (if you program it to). Follow the building instructions. Use it at home or at class.
This robot was built by your request. It includes NXT large wheels. The Large LEGOO Mindstorms wheels will give you a faster robot, but be careful, because it will not be that accurate.
This is a very funny robotics hand with 3 fingers that you could put on your hand to "Rule the World". It's funny to control it with the touch sensors.
This is the second version of the EV3 Easy Bot. The robot is used in classes with students as one of the first robots to be built. Easy to follow and to arrive at a construction even for first-time students.
This modification of the box robot contains large wheels. It was specially requested by you and we have it.
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
