After we've download the software we must install it and most importantly configure it. Without propertly configuring the software it would be difficult to use the Cortex Controller.
To control the VEX Cortex controller we must use a software. In this episode we would download the software from the VEX site. Strange thing is that you must select your region correctly even if you are not in this region
In the RobotC software we could make the robot wait for a couple of seconds by using the wait function. This will give the motors a chance to work and this will actually move the robot.
Now that we know how to make the robot move forward let's see we can make it move backward.
In this episode we combine in a single program the previous two programs for moving forward and backward.
With this video tutorial, we start with Turns with the VEX EDR robot.
How does this construction of VEX EDR turn? It has two motors. Let's start with turning right
Spinning with the VEX EDR robot involves the use of both motors. The left and the right. Every robot with wheels could spin and this makes not exceptions.
The next important step when turning with a robot is to learn how to do an Arc turn.
Where is the math while turning? Is there any math involved? Should there be?
In this tutorial we would introduce you to the concept of loops using this VEX EDR Robot. As a final result we would have a program that makes the robot move in a square and not by repeating the same instructions for move and turn four different times.
To prepare the robot to move in a square and to use a loop in the program we would first make this VEX EDR robot move forward and turn, using a program developed with RobotC.
We start with the previous program where we made the robot move forward and turn. We continue in this tutorial with repeating the same RobotC instructions four times. Our goal is to make the robot move in a square.
The previous tutorial showed you how to copy/paste instructions in RobotC. The current video will introduce you to loops.
In this tutorial, we set the task of implementing another figure with the robot - a triangle.
The more advanced task is to more in a polygon. This would require calculating the degree of each of the turns and RobotC is a language in which you could implement this math calculation very easily.
Unpacking the VEX EDR set and learning the names of the different parts included in the set
Conenct the motors of the VEX EDR motor to the VEX Corted Controller. For connecting we need the motor drivers.
The comunication between the motors and the controller should be configured in the RobotC software. Each motor could be connected on a different port and the goal of the video is to show you how.
