Building Instructions -

• FIRST LEGO League

-

• LEGO MINDSTORMS EV3

The Sports Utility Vehicle box robot is the new marvelous box robot that we've created. It is designed for teams that would like to learn how to build balanced, stable and working robot chassis following our box principle. It is smaller and easier to build than box robot 1 and it is more simple than box robot 2. 

The main advantages of this robot compared to previous box robots are 

 - motors in the right direction, so when rotating the motor forward, the robot moves forward.

 - it is much easier to attach attachments. There are 4 different gears on which you could attach attachments. 

 - it has a large clearance - which means that it could move over obstacles.

Of course, it has a Gyro and two Color Sensors.  Not only that, but we have all the cables shown in the construction.

When not to use this robot?

The SUV Box robot is design to be used with a Gyro sensor and two Color Sensors for alignment. It is not working well for following lines as the sensors are very high and they are very high to allow for high clearance of the chassis. If you need to follow lines we recommend the Dominator X-Y robot

Attachments:

 - [How NOT To] Build An Active Attachment For SUV Box Robot

 - Simple Pinless Attachment for the SUV Box Robot

 - SUV Front Active Attachment for Box Robot

 - Attachments Frame for SUV Box Robot

Dominator is a compact LEGO Mindstorms EV3 Box robot from the family of the Roller Coaster and Kiddo box robots. Similar to the previous two robots, Dominator also can move its front part up, down, left and right. This robot also has the same length of movement as its two predecessors of this type - 8 LEGO pins on the side and up.

The difference is that Dominator has fewer parts and has a perfect center of weight that allows it to use large attachments and lift heavy objects without threatening its stability. The movement on the X and Y axes has the same gear ratio. The light sensors are attached to the movable part of the robot which enables it to both follow a line and recognize the color of various object with height lower than 7 LEGO units.

Second part of the building instructions for this LEGO Mindstorms EV3 competition robot chassis

Meet Kiddo, smaller sister of Roller Coaster. It is smaller, easier to build and easier to control box robot with X-Y moving plate.

The goal of this robot is to have one complex attachment that could move in four directions. With such an attachment you can solve a lot of complex tasks without loosing time changing attachments. It is also quite sturdy and packed

Here is an idea. What if a robot does not need attachments. What if there is one special attachment on the front that could do most of the work? Probably an attachment that allows you to move a lever in any direction.

This here is a Box Robot with X - Y axys plane. This robot doesn't need active attachments because it has X - Y table that do the job. Imagine that there is a plane on the front of the robot. With the rack mechanism you can move to any coordinates on this plane. 

We have a lot of ideas how to make it even better. We will try to release them in the next few versions.

Building instructions for a competition robot following the "Box robot" principle. The robot is built with LEGO Mindstorms EV3 and could be used at FLL and WRO.

The first part of a box robot chassis for robotics competitions. The robot is quite large and this is why we split it into two parts - to make it easier to construct it. This is the second part. 

The robot is built with LEGO Mindstorms EV3, with an additional part for the walls used in the second part.

This is a real competition robot with three light sensors and a gyro.

Building instructions for a Full LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions.

The instructions for building the improved EV3 Competition Robot by Mic Lowne

Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions

Building instructions for a LEGO Mindstorms Base Chassis with a reversible motor

Note: This robot contains wheels that are from the NXT set.

Attachment frames are used on Base Robot Chassis to make it easier to add and remove attachments very fast. This frame is for the Box Robot 1. It is a single module build with LEGO Mindstorms EV3 parts and it could handle attachment on all sides. 

This is a frame for the SUV Box Robot. Tis frame is an adapter between the robot and the attachments. You can add-in several attachments on it and mount them on the robot simultaneously with one movement.

The frame has two locks that make the attachments stick to the robot. Also the front Knobs must not be used for very powerful activities due to jumpings, unless the frame with attachments become heavy enough to prevent any jumping of the frame.

This modification of the box robot contains large wheels. It was specially requested by you and we have it.

Frame for adding attachments on the robot. When using a frame it is very easy to quickly add and remove pinless attachments from the robot. The whole frame could be removed.

The frame contains parts from LEGO Mindstorms EV3.

Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.

Robot attachment that shows you how a circular motion could be transferred to linear by using a gear and a rack. The final motion is for pushing and pulling things. 

The attachment could be built from LEGO Mindstorms EV3 and NXT parts. 

When you need a LEGO robot attachment to lift heavy things on the competition field. Probably at FIRST LEGO League or World Robotics Olympiad. This attachment uses 4-5 gear wheels to lift a heavy object.

Build with LEGO Mindstorms EV3 parts. 

Modification of the EV3 Competition Robot Full with light sensors attached to the front