Building Instructions -

• World Robot Olympiad

The Sports Utility Vehicle box robot is the new marvelous box robot that we've created. It is designed for teams that would like to learn how to build balanced, stable and working robot chassis following our box principle. It is smaller and easier to build than box robot 1 and it is more simple than box robot 2. 

The main advantages of this robot compared to previous box robots are 

 - motors in the right direction, so when rotating the motor forward, the robot moves forward.

 - it is much easier to attach attachments. There are 4 different gears on which you could attach attachments. 

 - it has a large clearance - which means that it could move over obstacles.

Of course, it has a Gyro and two Color Sensors.  Not only that, but we have all the cables shown in the construction.

When not to use this robot?

The SUV Box robot is design to be used with a Gyro sensor and two Color Sensors for alignment. It is not working well for following lines as the sensors are very high and they are very high to allow for high clearance of the chassis. If you need to follow lines we recommend the Dominator X-Y robot

Attachments:

 - [How NOT To] Build An Active Attachment For SUV Box Robot

 - Simple Pinless Attachment for the SUV Box Robot

 - SUV Front Active Attachment for Box Robot

 - Attachments Frame for SUV Box Robot

The first part of a box robot chassis for robotics competitions. The robot is quite large and this is why we split it into two parts - to make it easier to construct it. This is the second part. 

The robot is built with LEGO Mindstorms EV3, with an additional part for the walls used in the second part.

Building instructions for a Robot Grabber used in the World Robotics Olympiad competition runs. The grabber is build with LEGO Mindstorms EV3. The base of the robot is available at /materials/69-wro-robot-2014-elementary 

Building instructions for a robot for the World Robotics Olympiad Sputnik competition. This is the light version without the lift at the top.

Light Cooley is an extension of Cooley. We've added two Light/Color sensors to allow for lines to be followed and for the robot to alight to them and we've kept everything Cooley was cool and known about. Build a few attachments for it and take it on a ride for a FIRST LEGO League competition

Playing Football with robots is extremely fun. It could be part of the classes, it could be part of demonstration days. The Striker is a robot for handling the ball and attacking the goalkeeper.

Building instructions for the LEGO Mindstorms EV3 robot used for accomplishing WRO 2014 mission. It is the full robot with the lift at the top

Building instructions for this LEGO Mindstorms EV3 robot used in the World Robotics Olympiad Junior competition

Playing Football with robots is extremely fun. It could be part of the classes, it could be part of demonstration days. This is the goal keeper.

This is Cooley, and, it, is, coooooool. It got all the stuff the cool kids have - two motors at the top, two at the bottom, two wheels on the side and it is slim. Build a few attachments for it and take it on a ride during FIRST LEGO League competition

For World Robotics Olympiad Ball Collection competitions we prepared an interesting Robot Base Chassis that could be extended with a container. The container contains the ping-pong ball. A mechanism collects them. This LEGO Mindstorms EV3 building instructions are for the chassis of the robot and were one of the versions from a series of robots. 

This is one of the robots used in World Robotics Olympiad. It uses chains to move ping pong balls out of a container.

Building instructions for the robot used in WRO 2014. It is a small robot with two light sensors and could be used for collecting elements. 

The robot is built from LEGO Mindstorms EV3 parts. 

Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3

This WRO robot is designed to collect a lot of ping pong balls in its container. It's built with LEGO Mindstorms EV3 45544 and 45560 sets. These are the LEGO Educational sets. The robot has two chains that collect the balls and push them into the container attachment. This is one of the larges robots we've uploaded at FLLCasts yet. You could learn a lot by following the building instructions and paying attention to the details of how this robot is built. All the alignment, all the connections. Really beautiful.  

Robot building instructions for a World robotics Olympiad with a large container used for collecting ping-pong balls

The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.

 

This is the robot that we use to demonstrate a solution for competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition. But after the competition we try to make a review and to see how we could have accomplish it. Our goal is to be better for next year.

This robot is quite powerful. The attachment mechanism on the front is one of a kind as it can do several things with a single motor: it can lift, it can unlock, it can grab. All of this thanks to the unique mechanism of gears

A chassis built with LEGO Mindstorms EV3 parts designed for World Robotics Olympiad

This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.