Building Instructions -

• LEGO MINDSTORMS EV3

Dominator is a compact LEGO Mindstorms EV3 Box robot from the family of the Roller Coaster and Kiddo box robots. Similar to the previous two robots, Dominator also can move its front part up, down, left and right. This robot also has the same length of movement as its two predecessors of this type - 8 LEGO pins on the side and up.

The difference is that Dominator has fewer parts and has a perfect center of weight that allows it to use large attachments and lift heavy objects without threatening its stability. The movement on the X and Y axes has the same gear ratio. The light sensors are attached to the movable part of the robot which enables it to both follow a line and recognize the color of various object with height lower than 7 LEGO units.

Meet Kiddo, smaller sister of Roller Coaster. It is smaller, easier to build and easier to control box robot with X-Y moving plate.

The goal of this robot is to have one complex attachment that could move in four directions. With such an attachment you can solve a lot of complex tasks without loosing time changing attachments. It is also quite sturdy and packed

Attachment frames are used on Base Robot Chassis to make it easier to add and remove attachments very fast. This frame is for the Box Robot 1. It is a single module build with LEGO Mindstorms EV3 parts and it could handle attachment on all sides. 

This is a frame for the SUV Box Robot. Tis frame is an adapter between the robot and the attachments. You can add-in several attachments on it and mount them on the robot simultaneously with one movement.

The frame has two locks that make the attachments stick to the robot. Also the front Knobs must not be used for very powerful activities due to jumpings, unless the frame with attachments become heavy enough to prevent any jumping of the frame.

Frame for adding attachments on the robot. When using a frame it is very easy to quickly add and remove pinless attachments from the robot. The whole frame could be removed.

The frame contains parts from LEGO Mindstorms EV3.

Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.

Robot attachment that shows you how a circular motion could be transferred to linear by using a gear and a rack. The final motion is for pushing and pulling things. 

The attachment could be built from LEGO Mindstorms EV3 and NXT parts. 

When you need a LEGO robot attachment to lift heavy things on the competition field. Probably at FIRST LEGO League or World Robotics Olympiad. This attachment uses 4-5 gear wheels to lift a heavy object.

Build with LEGO Mindstorms EV3 parts. 

In this attachment two knob wheels "(32072 ) Technic Gear 4 Knob" engage at 90 degrees angle. One of the knob wheels is a part of the robot and the other is a part of a pinless active attachment. The purpose of this attachment is to demonstrate How NOT to build attachments. 

Build the attachment and experiment. See for yourself how it "jumps" up and down when the knob wheels are rotating and you hold the lever by hand. 

This is a simple pinless active attachment for the SUV Box Robot.

In this attachment we use "(32498) Technic Gear 36 Tooth Double Bevel". There are four pins added to the wheel and it it this pins that engage with the "(32072 ) Technic Gear 4 Knob". The more important thing is that the knob wheel and the gear wheel are parallel to each other.

While the motor rotates the attachment has 4 points of contact (instead of one or two when two Knob Wheels are in contact) with the robot knob wheel. There are no forces that drive the attachment to jump and lose engagement with the robot.

A robot attachment placed on the right side of the LEGO Mindstorms Box robot chassis. It uses two gear wheel to move a level. The level could collect things.

This attachment uses a connector ("(98585) Technic Connector Circular With 2 Pin Holes and 3 Axle Holes") with 4 pins to connect with a knob wheel ("(32072 ) Technic Gear 4 Knob") of the robot. Because both elements are parallel one to another there is no jumping effect.

The attachment uses two pins, but it is easy to attach and detach because it uses "(6558) Technic Pin Long with Friction and Slot". When you attach or detach the attachment the slots are keeping the pins strong on to the attachment.

Also an attachment connected to the robot in this way, can be move to the rigth knob wheel or to the left knob wheel.

Attachment used to transfer the motion from the motor from a vertical axle to a horizontal axle. Uses two gear wheels. Could be built with LEGO Mindstorms EV3 and LEGO Mindstorms NXT kits.   

Here is an example of Four(4) active LEGO Mindstorms attachments built-in the frame. Two by two they work asynchronously since all of them are connected to the two separate middle motors of the SUV robot via the frame.

The left attachments work synchronously, and the right attachments are also synchronized couple.

These specific attachments are meant to do nothing in particular, but to serve as an example. Their purpose is to demonstrate different ways in which one could add an attachments to the frame. Experiment. Think and invent better frame with real world attachments that could actually do efficient work and accomplish a mission. Take a video then and share it with us. 

This robot attachment shows you how to limit the rotation of a lever. It uses two gear wheels to transfer the motion on 90 degrees. 

It could be built with LEGO Mindstorms EV3 and NXT versions. Most of the time during competitions like FIRST LEGO League and World Robotics Olympiad you need a lever for just a limited motion

No need for all attachments to be powered by motors and to include gears. It's sometimes possible to use a simple robot attachment to collect objects. Such attachments we call passive and this one is an example for the Box Robot Chassis.

Build with LEGO Mindstorms EV3 

We have to admit. This is quite an interesting missions. There is a Manhole cover and it must be turned upside down. Well, the robot must turn it. Again LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro is used as a base for the Robot.

Lifter is an pretty fast and pretty strong attachment that lift up... things... like exercise machine, astronauts and other stuff.

A program for that attachment in Into Orbit 09 - Strength Exercise challenge is located at programs/hm9c06-lifter-an-attachment-for-suv-box-robot-and-into-orbits-m09-strength-exercise-program.

A simple active attachment that could be added to the Box Robot Chassis.

The central axle of the robot is most of the time the most important. The robot moves forward and does things with this axle. It is important to learn to you could extend such axles, and change the level and position of the extensions.

This is a LEGO Mindstorms EV3/NXT robot attachment.