This is a steering mechanism made to look like a fish tail, so that you can make the coolest fish robot that steers like a fish. It uses a medium motor to move left and right. You can combine it with other modules to make your sea creature robot with a tail!
This is a movement module, that works like real boat paddles! It consists of two paddles, each connected to a large EV3 motor. The module can be connected with other modules to make a robot that moves like a boat!
Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
Building instructions for a VEX IQ attachment for throwing balls with rubber bands.
- you should attach it to the motor, depending on the orientation of the motor
This attachment for the Nautiq robot is designed to lift the coral for M01 Coral Nursery from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It performs two actions simultaneously: lifting the mission model loop and opening the door that holds the Reef Segments.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
This attachment is accomplishing three missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 11 - Light show. It partially solves mission 14 - Audience delivery.
These are 3D Building Instructions for M14 Sample Collection mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. This mission model does not have an alternative due to the specificity of the parts.
These are 3D Building Instructions for M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Unexpected Encounter for additional building possibilities.
In Maltese, "orrur" means "horror."
This robot consists of two parts. The first part is a hub connected to a distance sensor that remains stationary. The second part is a mini wind-up car that moves forward using a rubber band. When the car passes in front of the distance sensor, the hub displays a scary face, creating a haunted ride effect. Can you add something even scarier to enhance it?
In Arabic, "mustakshif" means "explorer."
This simple robot uses two wheels connected to medium motors for movement. It also has an ultrasonic sensor at its front.
Alternative to Bag 14 - Cargo Plane Alternative Model - FIRST LEGO League 2021-2022 CARGO CONNECT
These are 3D building instructions for an active pinless attachment from LEGO Education SPIKE Prime set. The attachment is used along with the Gazon robot to push mission models.
